P
Printables
Clover Mickey
This is a 2D Mickey head with a two clovers (On the ear) and a top hat with a small clover on it. You will have to glow the peaces together.
Search results: mickey
Counting matching models…
P
Printables
Disney pintrading Mickey Mouse board - Lasercut
A Mickey Mouse shaped frame made on a lasercutter out of 3mm plywood, 3mm perspex, 3mm Cork tile, black fabric and M3 blots. This will allow you to display your Disney pin trading collection on the wall without the worry of them…
P
Printables
Chibi Mickey Mouse
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
P
Printables
Mickey Mouse
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
P
Printables
Mickey Creepy Guy
Mickey Mouse! Now introducing the first Disney Creepy GuyTM introducing Mickey!
P
Printables
Fantasy Football Mickey Trophy
What screams fantasy football more than fantasia mickey holding a football? made as a joke so that the league's fantasy football trophy could go into someone's "Disney cabinet" if they won. Supports are absolutely needed, I put the…
P
Printables
Mickey and Minnie Mouse Halloween Pumpkin Lamp
A Mickey Mouse pumpkin head lamp for the MH001 lamp kit from BambuLab or similar (search lamp kit on aliexpress). It is relatively looser fitting with retention fingers so other lamps can fit. It features a large central pumpkin with two…
P
Printables
Mickey Mouse Ice Cream Bar Charm
Using supports for something this small is helpful as the stick will not print properly. I enhanced/thickened stick from original model.
P
Printables
Mickey Mouse
Did you just come back from a Disney trip, and you miss the mouse then download this file.
P
Printables
Indiana Jones Magnetic Mickey Ear
Disney Indiana Jones Magnetic Mickey Mouse Ear Category: Other
P
Printables
Indiana Jones Stunt Show Magnetic Mickey Ear
Disney Indiana Jones Stunt Show Magnetic Mickey MouseEar Category: Other
P
Printables
Panic Magnetic Mickey Ears
Hercules - Panic - Magnetic Disney Mickey Mouse Ears Category: Other
P
Printables
Belle Rose Magnetic Mickey Ear
Beauty and the Beast - Belle Rose Magnetic Mickey Mouse Ear Category: Other
P
Printables
Cave of Wonders Magnetic Mickey Ear
Aladdin Cave of Wonders Magnetic Disney Mickey Mouse Ear Category: Other
P
Printables
Beauty and the Beast Magnetic Mickey Ear
Disney's Beauty and the Beast Magnetic Mickey Mouse Ear Category: Other
P
Printables
Pascal Magnetic Mickey Ear
Tangled - Pascal - Magnetic Mickey Mouse Disney Ear Category: Other
P
Printables
Orange Bird Magnetic Mickey Ear
Disney World Orange Bird Magnetic Mickey Mouse Ear Category: Other
P
Printables
Maximus Magnetic Mickey Ear
Tangled Maximus Magnetic Disney Mickey Mouse Ear Category: Other
P
Printables
Dalmatian Mickey Magnetic Ear
Dalmatian Disney Mickey Mouse Magnetic Ear - 101 Dalmatians Category: Other
P
Printables
Cruella De Vil Magnetic Mickey Ear
Cruella De Vil (101 Dalmatians) Magnetic Disney Mickey Mouse Ear Category: Other
P
Printables
Disney Jack Skeleton Castle Mickey Ear
Disney Jack Skeleton Castle Mickey Ear - Nightmare Before Christmas Category: Other
P
Printables
Mickey Frame Bipod Stand
Uses the model's existing nail hole to prop the frame up. Prints in less than 10 minutes on a Core One
P
Printables
Mickey Shamrock Bath n Body Works Soap Holder
Wife asked for a shamrock themed soap holder and I delivered. Printed .2 height, color and print face down, glue together for ease of printing. Remember to break the front one into parts to color the parts individually.
P
Printables
Mickey Mouse Ring
Hope you enjoy this model and let me know what else you want to see me make!
P
Printables
Mickey (Brave little tailor)
This was made by WingedBirdStudios, so any attention goes to them!
P
Printables
Mickey and Minnie
Remix of Key Guy's Mickey Mouse Keyholder. Took the keyholder part off and extruded parts of the model to reduce color bleed and added optional holes to add key rings Printed on Snapmaker U1 0.08 High Quality Settings Ironing all top…
P
Printables
chibi mickey mouse
Add a touch of magic to your collection with this Chibi Mickey Mouse 3D printable figure! Reimagined with charming "chibi" proportions, this model features Mickeys iconic ears, cheerful smile, and classic outfit, all simplified into a…
P
Printables
Mickey Mouse Custom Pump Cover
I took the elite liquid cooler pump cover model and added a Mickey Mouse logo onto it.
P
Printables
Goofles - Mickey Mouse Clubhouse - Toodles Remix
Goofles version of the Toodles model, by request. Category: Toys & Games
P
Printables
Quoodles - Mickey Mouse Clubhouse - Toodles Remix
Quoodles version of the Toodles model, by request. I changed the face a bit to make her a little different. Apologies for the color scheme on the image, Toodles is still in the previous configuration. Category: Toys & Games
P
Printables
Toodles - Mickey Mouse Clubhouse
I mostly just traced the image in solid works and extruded the surfaces to different heights. Made 2 for my boys as large as it would fit on my printer. Category: Toys & Games
P
Printables
"Mickey Mouse" Glove pointer
Print and add a 10 mm diameter dowel and you will have a pointer that looks like a classic Mickey Mouse hand. Printed with black and white filament on a FlashForge AD5X. Infill 5% with Gyroid. Printer poop is minimal because the white…
P
Printables
Mickey Mouse Coaster
Just a simple Mickey coaster I made for my kids room. I printed it on a Creality k1c and I scaled mine to a uniform 115 percent using orca slicer, but the default size might work for you. I like to print my coasters in tpu, but this model…
P
Printables
Mickey Mouse Christmas window ornament
You are doing me a big favor by clicking the Like button :-) Mickey ornament to place in the window it is translucent. Black 0.4 nozzle 0.20 layer height Diffusters 0.25 nozzle 0.10 layer height
P
Printables
Minnie & Mickey Kiss 2D
Silueta pensada para pegar en un lienzo de 150 mm x 200 mm , me ha recordado a mi infancia. Sientase libre de escalarla al tamaño que mejor se adapte.Enjoy!!! Se ha impreso en PLA Negro Winkle con un ancho de linea de 0.2 y un 10% de…
P
Printables
Mickey Mouse Light Switch Design With Lip
I originally printed the model by @Ladamtla, but then couldn't figure out how to put it on top of the switch (now I am guessing you could use double-sided tape), so I added a little lip to the bottom. OPTIMAL PRINT SETTINGS: Initial layer…
P
Printables
MICKEY SMART VASE
Easy to maintain, enjoyable for children and appealing to eternal young adults. Just add some soil, succulent plants, and water - that's all your plants will need! ① Watering your succulents has never been easier! ② With a precision of…
P
Printables
MICKEY
Hello guys, I would like to introduce to you me new model. It is MICKEY. SUPPORT NECESSARY, as you can see on the pictures. Follow, like will be nice, thank you. I hope you will like it. Happy printing.
P
Printables
wallart helloween mickey
-layer 0.2 -3 walls -no brim -wall generator arachane and a did whit top surface pattern hilbert curve because a like the effect.. -print in place and scale it how do you want.
P
Printables
Set of Mickey Mouse, Minnie Mouse cookie cutters
Set of 5 cutters. Dimensions are next: 74х84х10mm 72x83x10mm 65x104x10mm 82x84x10mm 96x90x10mm PLA with cooling, thin walls - On, layer 0.16-0.24mm. Please take a look at the other scans and models that are available. =)
P
Printables
MickeySkellington or JackMouse
Halloween decoration ornament of Mickey Skellington or Jack Mouse.
P
Printables
Mickey and Minnie Straw Toppers
My family has been obsessed with the 3D Printed straw toppers I made previously and so they requested I made some Disney ones. I modeled these myself specifically to work on a single extruder printer. The bow can be printed in any color…
P
Printables
Mickey Mouse Single Line Wall Art
Mickey Mouse single line wall art made to be print 2 Files, one with ears and nose connected to the main frame and one with separated pieces
P
Printables
Mickey Mouse Vitruvian Man Wall Art
A great Wall Art of Mickey Vitruvian Man. Do not forget to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by a drawing Here are my others Vitruvian man…
P
Printables
HeyGears Drip Caddy Remix Mickey2
Printed on fdm printer @ 0.2 layer height. Use 4 or 5 perimeters, 20% infill. No supports I used the mouse ears at the corner to prevent lifting, they are 0.2mm high so can be popped off after printing.
P
Printables
Mickey Mouse (standing)
Mickey Mouse model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
P
Printables
Mickey Mouse Scratcher
I printed with PLA, but I think any other filament would work, show me what colors you guys use! It was my first project on Fusion where I used a reference image to sketch this, it was AWESOME :)
P
Printables
Mickey cake pop
I printed on an ender with no supports You have to separate the parts in the slicer and rearrange then, sorry it's my first model. Please leave feedback!
P
Printables
mickey mouse ears for dummy 13
my friend made these for me cause I couldn't find a model, so I hope you enjoy
P
Printables
Mickey ears case
Mickey ears case designed to hold 2 pairs of Mickey ears. Twelve 10x3mm magnets are used to keep the lid attached. My wife loves this for light trips. Let me know if you would like deeper sets or any feedback. I did design them to be very…
P
Printables
Mickey and Minnie Mouse Valentines Box
Hey guys! 🐭❤ This Valentine’s box featuring Mickey and Minnie Mouse is one of my most downloaded models! And honestly, it’s easy to see why – who could resist this iconic duo? It brings a bit of Disney magic and is perfect for…
P
Printables
Mickey Mouse and Minnie Mouse
Hey people! 🎀🌟 And since I already have Mickey Mouse, his partner Minnie definitely can’t be left out! Together, they make the best pair. This model is once again adapted for multi-material printing, so you can easily create it. Don’t…
P
Printables
Mickey Mouse Love
Hey people! ❤🐭 Valentine's Day is here, and so is our beloved Mickey Mouse, holding a heart full of love! This adorable piece is the perfect way to express your feelings. With Mickey by your side, you can be sure to celebrate love with a…
P
Printables
Mickey Wall Hook
I didn't see any good Mickey wall hooks, and we are doing a Disney bathroom, so I designed a wall hook with a Mickey silhouette. Printing Notes Recommended to print with ABS, PLA+/ToughPLA or PETG for strength. PLA may not work. No…
P
Printables
Mickey Cookie Cutter and Minnie Cookie Cutter Topolino
🎀 Bring magic to your kitchen with Mickey topolino and Minnie cookie cutters! 🐭
P
Printables
Lego Mickey Mouse Minifigure head
Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)
P
Printables
Mickey Christmas house ornament - 2024 Christmas Ornament
I've seen something like this before, I've decided to make it myself. Have fun with it!
P
Printables
Mickey "Santa Claus" Mouse - Christmas Wall Art
Mickey Mouse is ready for Christmas season! Interested in more themes? Subscribe to the club for additional on demand designs. Want to sell your prints? Join my club! Members can legally sell physical prints of this design and gain access…
P
Printables
Disney Fuel Coaster with Mickey Mouse
A Mickey Mouse coaster design… for all Disney fans! Test printed on Bambu A1 with AMS Lite, filament used: Elegoo Rapid White Elegoo Rapid Black Bambu Basic Pink Commercial Rights If you wish to have commercial use rights, you can Buy Me…
P
Printables
Mickey Decor - Light Cover Frame (Decoração Mickey para Espelho)
My fiancée loves Mickey, so I made this to make her happy. Fits in my Light Cover Frame - Brand Legrand (Espelho da marca Legrand) https://www.printables.com/model/1083406-light-cover-frame-brand-legrand-espelho-da-marca-l Material: ABS…
P
Printables
Mickey christmas cookie cutter
Mickey christmas cookie cutter Cookie cutter designed for easy use and good looking cookie. I mainly wanted the dough not to stick to the mold and for the edges of the cookie to be even and nice everywhere. Recommended Print Settings:…
P
Printables
Mickey Mouse Christmas tree ornament
This Mickey Mouse Christmas tree ornament is designed for ease of printing and assembly. It features Mickey’s recognizable round head, large ears, and signature red, black, and white color scheme. The model is split into separate parts,…
P
Printables
Christmas Mickey Mouse
This is a Mickey Mouse with a Christmas hat and a D for Disney in one of the ears.
P
Printables
Mickey Hat Maker
This is a DIY mickey hat maker. All you need is a pair of over the ear muffs. I have also included a beta test for a magnetic version, which works... but doesnt stay put as well as i had hoped. I used neodyn mags for that. If you want one…
P
Printables
Mickey mouse ordaments(For christmas tree)
u can do anything with this,u can use supports and overall its simple to 3d print
P
Printables
Imperial Mickey Mouse
It is an imperial mickey mouse, however, as it is hollow, what you have inside is support instead of having infill.
P
Printables
Mickeys Christmas Ornament
Mickey Mouse Christmas tree ornament wishing Merry Christmas in Portuguese
P
Printables
Disney Pin Board (Round), with Mickey Silhouette
All parts printed at 0.2mm layer height. I designed a 0.2mm gap between all parts that fit together based on the tolerances of my printer and the filament I used. The size of the largest part was limited by my print bed. When printing the…
P
Printables
Insert puzzle - Mickey - Baby on board
Insert puzzle for children. I recommend checking before use that the puzzle has no sharp edges anywhere, otherwise clean them. The size is designed so that it can be printed on printers with a smaller printing area (180x180mm and larger)…
P
Printables
Insert puzzle - Baby Mickey
Insert puzzle for children. I recommend checking before use that the puzzle has no sharp edges anywhere, otherwise clean them. The size is designed so that it can be printed on printers with a smaller printing area (180x180mm and larger)…
P
Printables
Mickey Mouse Cookie Cutter
Cookie cutter. Print in PETG or PLA 20% Speed. 15% infill is fine.
P
Printables
mickey mouse keychain dual color
ace down mickey mouse keychain if you want to support me feel free to buy me a coffee! https://buymeacoffee.com/otlcustomdesigns Sell my prints commercially by joining my Patreon Join my Patreon to gain access and commercial license to…
P
Printables
Mickey Mouse Candy Cane Christmas Ornament
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White for the rest. Use PETG for the best results.
P
Printables
Mickey Head Spoon Rest with Magnet holes.
The Mickey Head Spoon Rest uses two ¾" x 3/16" (18mm x 5mm) magnets that I purchased at Walmart or on amazon CLICK HERE No supports needed. Can be printed in PETG to be dishwasher safe or PLA for handwash only.
P
Printables
Epcot Mickey Ear (5 Magnets)
An EPCOT Mickey ear for your trip to Disney. Meant to be interchangeable with most 5 magnet Mickey ear models and headbands.
P
Printables
Mickey & Minnie Love Wall Art
❤✨ Mickey & Minnie Silhouette Wall Art ✨❤ Add a magical touch to your wall this Valentine’s Day! This 3D-printable decoration features two separate models: the iconic black silhouettes of Mickey and Minnie, each with a bold red heart on…
P
Printables
Mickey Mouse - HueForge 4 Color)
Mickey Mouse 4 Color HueForge 133X200mm Print instruction: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of…
P
Printables
Pirate Mickey Medallion
you can print each peace separately, or as whole if you have an ams. for the face and scull you can merge them with the black and hat then you can raise them up to the correct hight and pause the print at the right time.
P
Printables
Cat collar tag Mickey, in Sinhala script
I created this for a friend's cat. Not sure if anyone has a cat named Mickey, but I'm uploading it anyway. The text reads “Mickey”, in Sinhala script which has elegant, round letterforms. Font used: Maname (…
P
Printables
Mickey and Minnie Taekwondo Stencil template
Stencil - Mickey Mouse and Minnie Stencil - Taekwondo Tested by applying paint with a sponge on paper and airbrush. Dimensions: 175x125x0.4mm Layer height 0.2 mm Pencils are allowed, I recommend increasing the Stencil thickness from 0.4…
P
Printables
Mickey Mouse Dummy 13
Dummy 13 wanted to cosplay as Mickey. The only changes are in the head by adding ears and replating for the colors to coordinate.