Sci-Fi Box-Lockable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sci-Fi Box-Lockable
- Rating
- 4.9 / 5
- Likes
- 2,810
- Downloads
- 6,565
- Makes
- 32
- Views
- 63,426
- Reviews
- 30
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
You will need 6 M3x25mm socket head fasteners, 2 Stainless steel dowel pins for the over centre latches (2mmx18mm). Optional 2 M3x35mm socket head fasteners for the 25mm strap anchor points on either end of the box. All the fasteners screw into the plastic.
I used these dowel pins that can be found on Bambu Labs maker's supply section.
Internal dimensions are: L78mm W134mm H60mm
External dimensions are: L112mm W160mm H77mm
There is a hidey-hole in the rear of the box if using the included insert sleeve for things like emergency cash etc.
The sci-fi box is lockable with a cable lock as shown in the photo description. It will accept up to a 4mm diameter cable. It can be locked on either end or both sides for maximum security.
I recommend superglueing all the fasteners in if you need the box to be tamper proof to keep your other half out or your siblings out depending on your age lol.
I recommend the latches be printed with a CF filled polymer or ASA,ABS @100% infill for strength and durability.
NB: All print files are in the correct print orientation.
No supports are required.
Happy printing.