1 / 3
Tolerance Test Pieces (with accompanying spreadsheet & resource)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print, measure using callipers and populate the spreadsheet to accurately predict dimensions in future designs.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 73
- Makes
- 3
- Views
- 368
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Aims of this Model:
These three models should be printed and measured in order to populate the spreadsheet (found within the attached pdf).
This acts as your 3D printing assistant, informing you of the optimal tolerances required within the CAD software to increase your chances of printing dimensionally accurate parts first try!
Print Settings:
- Nozzle Diameter: 0.4mm
- Infill Density: 10%
- Infill Pattern: Gyroid
- Layer Height: 0.2mm
- Support Usage: None
- Brim: Enabled
- Brim Width: 5mm