Unifi USG/Switch rack mounts (1U)

I really liked the original design of https://www.thingiverse.com/thing:4125055 and since printing some not-so-good mounts for USG (Unifi Security Gateway) and their switch (without poe and poe-60w) I wanted to try to remix original design.

Parts

Unifi security gateway mount

Size of two raspberry pi frames.

TODO: There's currently no holes for the screws to attach the device securely in place in the mount, but the wholes are right on the edge of the bottom hole in the mount so it's possible to bundle them together (see the picture). In the picture there's no chamfer on the mount in front bottom edge. It's fixed in the design.

Switch

For 8-port switch without PoE or with 60W PoE. Size of two and half raspberry pi frames.

Spacers

Since switch takes 2,5 "units", there's need for filling up the remaining half "unit". There''s two versions, one with front plate and one without (if you want to use micro-usb/usb-c cable with your raspberry pi).

Raspbery pi frame

I don't have PoE hat for raspberry pi so I needed a frame where I can have usb-cable attached to raspberry pi when taking it out and putting it in. You can use the original tray with this one.

Raspbery pi tray

I wanted to have small screen for the pi so designed a place for 128x32 screen. Works with the original frame.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Infill:

0.2

Notes:

Category: Computer