1 / 4
compactkb keycap set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I didn't see the use of a portable mechanical keyboard so i designed these keycaps to be used with it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 158
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Print instructions:
- Print these face down.
- Infill is almost insignificant as its all perimeters.
- Use random or scarf seams or align seams on top of the key-caps.
- Use a 0.4mm nozzle or smaller.
- Use a max layer height of 0.20mm.
Finish instructions:
- Fill the de-bossed letters with white cement/paint/primer paste.
- Sand the top with high grit sandpaper after drying or wipe the cement/paint/primer while semi solid.
- If you sanded the keys apply a thin coat of epoxy resin or nail lacquer to give them a smooth finish and not get cement on your hand.