1 / 1
Voron 1.8 X-Endstop Stealthburner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stealthburner on Voron 1.8 does not reach lower joint with its endstop and I would need to p
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 403
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
Stealthburner on Voron 1.8 does not reach lower joint with its endstop and I would need to print whole new lower joint with some spacer reaching to endstop so instead i designed a little bracket that is held with M5 screw that screws into 2020 T-Nut and holds endstop with 2x M3 screw. (you will need 2x M3 heat insert). I also put a little double side tape just to make sure it does not rotate :D
It's around ~7 minute print,
Just make sure that your leadscrew doesnt interfere - mine were just short enough