1 / 1
Smaller nozzle for CCV F31 Air duster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CCV F31 only comes with one nozzle. Here's a printable nozzle and a blank base to make your own
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The picture shows two printed nozzles and the original. The tall narrower one causes too much back pressure and doesn't work well so it is excluded from the STLs. But I have included a base by itself so you can make a nozzle of whatever shape you want.
Requires a small magnet be glued to inside the nozzle to properly attach to the duster. The shape of the pad for the magnet will accommodate a small round, oval, or rectangular magnet.
Print without support