Airvape Legacy Pro waterpipe/bong adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since the OEM silicone bong adapter is a very loose fit, I designed this alternative which has very tight tolerances
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the OEM silicone bong adapter is a very loose fit, I designed this alternative which has very tight tolerances. You can use it confidently without worrying about the vaporizer falling to the ground when you hold the bong, there is absolutely 0 wobble anymore.
Depending on your printers precision you might need to play around with the slicer settings to get it to fit right. I printed the model with a Bambu P1S using hard TPU, and it is a snug fit.
To make this adapter work with a 14mm bong you need to order this glass adapter (or use any other with a 10mm outer diameter): https://www.vapowelt.de/Bubbler-Wasserfilter/WOLKENKRAFT-FX-MINI-ULTRA-14-mm-Glasadapter::2789.html
If you have a bong that takes 10mm or 18mm glass there is also this one available that should fit: https://www.vapowelt.de/Bubbler-Wasserfilter/WOLKENKRAFT-FX-MINI-ULTRA-Universal-Glasadapter-10-14-18-mm::3116.html
In the coming days I will also model an adapter that works straight out of the printer, without the glass piece. But keep in mind that one would cause the vapor to come into contact with the adapter, whilst this one only holds the glass piece into place but doesn't touch the vapor (except for a tiny part with roughly 1 mm^2 surface area)