1 / 1
Back center for 350 mm, with pass through for canbus/filament
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back center plate for 350 mm Voron, with pass through for canbus/filament - M12 and M10
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 120
- Makes
- 0
- Views
- 789
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A top hat centre piece with holes for the canbus cable gland, and PTFE guide.
If you have a top hat on your voron, you must want the gantry to be able to move higher on the printer. Moving the cables and filament guide will help. Also, it will reduce the wear on the can bus cable – no more flexing on the cable chain.
Note: my cable gland attached well, my ptfe guide to so much, but with a little patience it went in securely.