Handlebar bracket 28mm Ayrton
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handlebar 28mm bracket
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v3.0
This model was made for the pitbike Ayrton but might fit more motorcycles.
The hole pattern is specifically for my laptimer pzracing - start plus case.
- Space between brackets: 94mm
- Space between handlebar top and bottom fillet: 17.8mm
Hardware requirements for installing on the handlebar:
4x m6 Barrel head 40mm
4x m6 nut with nylon
Specifications for usage:
There is a 3 hole pattern for M4 bolts / Guide pins.
Main hole for M8 bolt.
This handlebar bracket can be used for more applications.
Suggested printing:
ASA or any UV material are suggested but not must.
50% infill at least.
at least 3 perimeters because of the nut seatings.
Printing parts:
2x hbadapter-bottom-v1
1x hbadapter-top-final-v1