Counting matching models…
Simracing LED Flag Indicator based on an Arduino Nano and an 8x8 WS2812 LED matrix. You can indicate flags, gear, pit limiter, or whatever you like. If you like, you can put the diffusor cover on top. Frotn part with integrated diffusor…
Project main site: https://www.thingiverse.com/thing:4891321 This is remix of Formula B1 - (Sim racing) steering wheel for Thrustmaster T300 RS wheel base. With other wheel mount or quick-release, this wheel could be also used for another…
you will need buttons ,carbon plate (can be printed) and an arduino -------------------------------------------------------------------------------- carbon plate from where ever or print it. i used an arduino nano but you can use…
A Chair Wheel stopper originally designed for the Secretlabs Titan. The Wheel have an diameter of ~61 mm and a with of 55 mm. The stopper has 2 embedded holes for 10x2 mm magnets for organisation and 4 holes for 10mm silicon feet to…
You need 4x M3 Thread inserts, 4x m3 screws and 2x m5x50 Screw with nut. Print as orientated with supports for max strength. The toleranzes are very tight for mimimun wiggle. Maybe you have to use some grease You could also extend the…
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
Cupholder for simracing rig. Holes for M8 screws. Inspired by https://www.thingiverse.com/thing:4888859 but optimized for 3d printing, with less overhangs - No supports needed.
Holds Racing gloves on a profile rig. For 40mm alu profiles and M8 Screw 3 versions: 1. with a rib for easy mounting on a vertical extrusion 2. with a rib for easy mounting on a horizontal extrusion 3. with clean backside
Should work with Moza too as they use the same QR but I can't test as I don't have Moza gear.
2025-04-13: Added Version for 50mm wheels. Gap between the wheels is still 20mm The Chair stopper stops your office chair from rolling away. I specially designed thi to use my office chair for simracing. The Stopper fits 60mm diameter…
This is a project for a direct-drive sim racing steering wheel base enclosure using a hoverboard motor and an ODESC Mini. This is my first project using FreeCAD, and I essentially learned it during this project. The project is mostly…
With this glue roller it is easier to wet larger surfaces with glue, also it should be easy to clean the device after use (depends on the glue of course :-) There are two versions, each with two different widths (46mm & 60mm) To use the…
Description Project: https://simracing-pc.de/en/2024/07/14/diy-project-simracing-laptimer-with-4-inch-vocore-screen/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Remix of the Vbox LapTimer RaceLogic (VoCore 4in)…
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Made it heavier and bulkier and modified the orginal to be suitable for T-slot 4040 and 4080 used for most simrigs. the longer ones are real nice to cover up the cable completely print them all standing up (I used petg)
Among Us + Rock = ImROCKter. No Supports needed.
Flexible cable management for xx80 profiles. 200mm, 100mm, and 50mm for varied run lengths. Mostly intended for simpits but anything that uses xx80 profile and has cables can benefit. Saw a few other models for different profile sizes…
UPDATE 2026-01-07: Fixed incorrect model for wheelbase-plate (yes, again). It now should match the pictures (_offset_2026 files). UPDATE 2025-12-10: My QR is still going strong on my rig, no failures! :) UPDATE 2025-04-21: Added STEP…
New design is available ! I found the 5" displays a little too small for my taste and wanted to go with the 6.8" display. I didn't find too many existing models for this so decided to design my own taking inspiration from what was out…
Because of a lack of a proper heel rest / heel stop on the Ultimate+ pedal base I decided to create some heel cups (inspired by some screenshots of F1 pedals) myself. It really helps keeping your foot in place in a good and constant…
V3 UPDATE 11/12/24: Added reinforcement across the whole lip. ------------------------------------------------------------------------------------------- V2 UPDATE 25/10/24: Due to excessive clatter on the 8020 profile, I've added a…
Lista de materiales y código de Arduino en la descripción del vídeo de YouTube citado en Summary Recomiendo imprimir todo en PETG, y si podéis el BrazoLeva en ABS. De todas formas yo tengo todo en PETG y ningún problema, pero si es cierto…
Prévu pour être implanté en bas de l'écran, à droite et à gauche : Orienté vers la tête. à symétriser pour l'autre coté. Base à fixer sur châssis avec une vis M6. Système tenon mortaise entre base et boitier. NB : Vous pouvez ajuster la…
I made one simple box for my Stream Deck MK2 to add it as a buttonbox on my sim rig. 4 pieces of M3x20 is needed for attaching the top to the bottom, selftapping holes in the top. I used the mounting from…
Steering wheel based on Ferrari 488 GT3 design GitHub Repository: https://github.com/Alby312/GT3-488-Wheel Wheel of 30cm of diameter, based on real wheel of Ferrari 488 GT3 with 12 push button 2 rotary encoder and 2 magnetic paddle shift.…
You'll need: A 330mm wheel - https://www.aliexpress.com/item/4000417198540.html?spm=a2g0s.9042311.0.0.27424c4dU2Z6Ag M3 threaded inserts 4.2x5mm - https://www.aliexpress.com/item/4000513304304.html?spm=a2g0s.9042311.0.0.27424c4dhffj8O M3…
Found I'm sometimes lightly pressing on the VRS brake pedal with bottom of heel. I was going to get the Simagic one but then decided to first give it a go with a 3D print and this is working out pretty well. Since this is 300mm wide it…
Project : https://simracing-pc.de/en/2024/08/16/diy-project-vocore-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ A small DIY project centred around the 4 inch VoCore display, consisting of…
Its designed to be placed over a 4040 or 8040 extrusion and bolted on with 2 M8 screws. Feel free to ask any questions if theres something unclear.
Update, Dezember 2025 Thanks to @ gerritkpunkt for edditing the Case to fit the universal Magnetic Mount https://makerworld.com/de/models/643295-universal-magnetic-mount-for-vi-ddus#profileId-2117855 DDU for your 5" Vocore Screen What you…
This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.
Print it standing upright so that the layer are oriented the right way. 3 walls, 10% grid infill is plenty. You will need 8 M5x25 screws and nuts for the aluminium profiles. Post a make if you use it. :) Update: now with lid!
This is a magnetic paddle shift for diy simracing wheels. Hardware needed: 1x 10x3mm round magnet 1x 12mm round magnet (spessor is your choice can be 3mm or 5mm for more force) 2x 5x4.5mm m3 heat insert (you can modify the lever in order…
10 mm and 12 mm Version available, 10 mm should fit mosts Seats. Mirror the parts in the slicer for the right side. Additional parts needed: 18x Screw M3 DIN912 16 mm for 10mm Version, 18 mm for 12 mm Version 18x Nut M3 DIN934 2x Screw M6…
Here are my changes to the original models: Streamdeck_Mk2_Top: was remixed that a Stream Deck Mk2 fits in there Streamdeck_Base_Open_Bottom: was remixed that holes for USB-cable are at the bottom closer to the mounting holes…
I used a little support on the inside edges. Nothing major. Common M6/M8 hardware used to assemble. One could add some felt or velcro bits to soften the surroundings but mine doesn't rattle as-is.
This simple holder will clip into a 4080 groove and will help support any device. I use it to keep the PSU in place (check photo) and the larger one to keep the portable keyboard.
Size L to fit 3-7 Cables depending on the size
Head over to the discord server if you want to discuss this model, or other sim racing DIY stuff https://discord.gg/aK2JKpwT4m ================ This is a metal mount to directly bolt the Dayton BST-1 Bass shakers to 20XX (20mm, commonly…
Added version 2.0 that I think looks better and also lets you set it closer to the pedal. I just printed in PLA and they work perfectly for me, but any material should work. Just make sure you don't tighten too hard. If you find you're…
simple remix of DaMaDo's mouse tray. 200 x 100mm so its narrow enough to sit inside the sim rig (useful if your available space is limited). I wanted something smaller and will be using with a trackball mouse so only really needs enough…
simple bracket to hold a keyboard on top of a 4040 aluminium profile rail. Most of the holders I've seen mount to the sides but I wanted to keep the width compact so this works for me - see picture I have it tucked on the side by my seat…
List of parts: https://simracing-pc.de/en/2022/05/19/diy-project-rpm-led-bar-by-simracing-pc/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 15…
Ihr benötigt: 2x bzw. 4x M6x15mm -20mm Schrauben und Muttern 1x M4x20mm und Mutter 2x M8 Schrauben + Nutensteine für die Montage am Rig
This is a simrig holder for the famous Nobsound NS-01G PRO Mini Bluetooth 5.0 Digital Power Amplifier. This Amp is quite commonly used für bass shakers. Link to the amplifier: https://amzn.to/4ucmMGd * Reccomended settings 0.16mm layer…
A holder for Pimax Crystal controller that snug nicely so it doesn't move even for motion rig.
Playing card box with hexagonal cutouts. Very light and cool looking! Inspired by another guy, but I wanted to make my own. It fits a regular-size deck of playing cards. Now with an improved lid that will never slip off! New lid is…
Hockenheimring, Hockenheim, Germany, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
I recreated these shifters using photos and datasheets provided by Cosworth. They originally are part of the entire CCW MK3 wheel design, but as that won't be finished for some time, I decided to release them as a standalone design so…
Remix of https://www.thingiverse.com/thing:4193571 to support bearings and nuts. The holes for the magnets are 12mm (instead of the 11mm of the original one) to increase the strength of the shift.
Print two of these for the back of a profile Sim Rig. It has two M8 holes in the center of each tail pipe to bolt up to the profile with. Print instructions Using Jet Black and then switching over to Pearl Mouse.
Upgrade your sim racing setup with this sturdy and practical phone holder, specially designed for 4040 and 8040 aluminum profiles (such as those used in a Sim Rig). Perfect for keeping your smartphone within reach to follow telemetry, lap…
A remix from the playseat version. Quick and dirty made because I couldn't lay it down anywhere near it where I could I could reach it. Modify it to make it better if you want. Print Settings Printer: CR6SE Rafts: No Supports: Yes…
I've made this heel rest for the pedals so you can be more precise while driving, no supports required. Is also available the model for the brake pedal: https://www.printables.com/model/743049-bj-simracing-pedals-brake-heel-rest
For use with M6 socket cap screws (hole size 6.2mm) + washers (hole size 12mm). Hole distance: 107mm Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** No…
its a model to make a steering wheel. It is uncomplete, missing details like screw holes, back cover, paddle shifters...
Project: DE: https://simracing-pc.de/2024/12/18/diy-projekt-simracing-spotter-lights-simhub-arduino-mit-30-leds/ EN: https://simracing-pc.de/en/2024/12/18/diy-project-simracing-spotter-lights-simhub-arduino-with-30-leds/ Web:…
needed to mount the usb hub to the profiles of my simulator it's a snug fit and doesn't jiggle around. uses M5 to secure
This root hook helps you at the repotting process. You can untangle gently roots with it, or remove old soil. With this improved version you also can work in new soil easily, by using the pointy end. This is necessary to make sure your…
Designed for Fanatec wheels. Using my CSL Elite wheelbase as a guide. This suits both P1 and McLaren V2 wheels. I cannot guarantee this will be suitable for other Fanatec wheels as I don't own any other wheels, but I believe they will…
2024-08-19 Update Also see this model . ----- As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS DirectForce Pro wheelbase. 52mm (Fanatec) PCD to 70mm PCD adapter Extension…
Inspired by RamjetX design https://www.thingiverse.com/thing:3077632 I made a bass shaker using the Mini Bass shaker pucks by Dayton for my Aluminium 8020 SimRig by www.swedishrigdesigns.com. In the stl files it's included also one design…
you need https://www.printables.com/de/model/721004-aluprofil-40-x-40-30deg-angewinkelt-winkel or equal profile to mount it to your rig
Project : https://simracing-pc.de/en/2024/08/02/diy-project-vocore-3-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ With the 3.4-inch display from VoCore, which has been available for a few…
I've made this heel rest for the brake pedal so you can be more precise while driving, no supports required. Is also available the model for the throttle pedal: https://www.printables.com/model/743042-bj-simracing-pedals-throttle-heel-rest
This is a sim racing steering wheel that can handle 16 buttons, and you can choose to mount two encoders. This is the second iteration I've made for this project, and it has been working very well for a year on a direct drive (DD)…
LMP style rotary encoder caps for the Thrustmaster SF1000
Print Instructions Material: PLA/PETG/HDGlass (Clear, See Through) Layer height: 0.2 mm or 0.15 mm Perimeters: 2 or 3 Infill: 15 % Supports: No
Habe diesen Halter nach einem kleinen Unfall nach modelliert und für Testzwecke aus PETG gedruckt. Ergebnis nach einem Jahr im Wasser, es sind keine Schäden oder Veränderungen festzustellen. PETG 100% Infill würde für den zweiten Versuch…
Case criada para uso com a tela Nextion 4.3. This Case has build to use with Nextion 4.3 Display.
Designed for the pro series of button boxes with the 90*80 drill pattern. I'm very new to 3d printing (and even newer to modelling) so I've kept the plate very simple. Printed on an A1 mini using 25% infill to try and minimize any flex.…
M5 screws and M5 nuts are required for assembly And USB 140 fan/PWM-USB governor
This is a simple headphone holder with M8 holes for my simrig
Simple bracket for aliexpress-special simracing shifter. Screw holes are 8mm in diameter, shifter screw holes are 110mm
Smartphone Holder in a two part design. Needs 3 M3x10 DIN912 Screws and 3 M3x4,2x5 heatset inserts to assemble. Printed mine in black PLA.
This is a quick and dirty router table insert for the Bosch trim router with matching templates. The router is quite powerful, so it works relatively well as a table mounted router even when cutting hard wood, albeit taking shallow…
This adapter allows you to mount your Simrad GN-1 to modern dovetail interfaces. with this it is possible to attach your Simrad GN-1 cheaply and pretty securly with the use of repro Wilcox G24 mounts. (I personally use the sotac one) to…
This is a Scout class ROV designed for printing on a 300mm x 300mm bed printer, Such as a Lulzbot TAZ or Similar. It is Very much a work in progress. It is designed to use 4 Blue Robotics Thrusters, the Electronics package from the Open…
Designed based on the Fanatec QR2 Compability to QR2 pro or light not tested
This “Yet Another Smartphone Holder” is supported by sliding and fitting over the screws, not being screwed in. This allows for a more shallow profile and therefore a smaller holder.
Mountingbrackets for mounting Sabrent 4-Port USB-Hubs to aluminiumprofiles (Simrig etc.) Also he power supply can be used. Hole is for M8-screws.
Simple yet effective way to mount HOSAS to a 4040 aluminum extrusion sim rig. Printed with 8 walls and 5 top and bottom layers it's super strong and has no flex at all. It has holes for Thrustmaster T16000M Dual Stick and VKB Gladiator…
Made to fit SimXPro Slots to hold 2-4 Cables depending on their size
This print allows to you run cables (power, USB, audio, ...) on your profile and keep them hidden. Both versions clip onto the rig slots, no hardware needed. It is very generous in space as I had a lot of cables to run. You can print…
Material: ABS recommended Perimeters: 4 Infill: 40-45% Solid layers: Top & Bottom 5/4
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
Head over to the discord server if you want to discuss this model: https://discord.gg/aK2JKpwT4m This is meant to be done in sheet metal, (.119″ or 3.02mm) steel. The covers are meant to be customized and 3d printed. I also added the…
The Hunger Games Characters - Primrose "Prim" Everdeen 3D printable model.
PLA 0.20 3 perimeters 50% infill Mount with M8 bolts in your simracing rig.
Disclaimer: This is a rally/drift steering wheel made for simracing. D o not use this in a real car. The shape and dimensions of the wheel are based on the sparco R383 but it is not a perfect replica. INTRODUCTION This steering wheel is…
Mount a Simagic haptic reactor motor to your Simgrade R7 brake pedal. Use Simhub to get the feedback tied to ABS. Works great. These YT videos inspired me to do this: That small device can TRANSFORM your pedals! - YouTube WHY YOU WANT A…
Button Box for Sim Racing. ------------Type A-------------- 9 Buttons (red and black) 12mm 2 LED buttons (red) 12mm Start Stop ------------Type B-------------- 9 Buttons (red and black) 12mm 2 LED buttons (red) 12mm Ignition switch…
Just replace the existing screws with M6x50 screws to mount the dashboad on the wheelbase. Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** No Supports:…
I wanted a clean cable management setup on my aluminium extrusion rig so I created some as the ones I found did not fit my displayport cable who were somewhat thicker than the power cable. One plate contains 4 clips, you can copy and past…
Simracing Cable Clip, made to fit SimXPro Slots to hold 1-3 Cables depending on their size.
Project : https://simracing-pc.de/en/2024/11/06/diy-project-steering-wheel-with-round-vocore-3-4-inch-screen/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ Parts needed: VoCore Screen 3.4 inch (MPRO) M3x12MM…
Simracing 100mm spacer with 2 bolt patters: 70mm and 60mm. I used it in an ffbeast build. M5 Bolts for 70mm M4 Bolts for 60mm is compatible with Moza / Simagic QR
A simple swiveling support to install the keyboard to my Swedish Rig Design SimRig. The table it’s a mdf board 480x220x5mm You will need a 100mm screw and bolt and two large washers to be inserted between the supports. Category: Automotive
![Simracing Button Box [porsche 911 gt3 replica]](https://media.printables.com/media/prints/740083/images/5780709_440878bd-1c6d-4dd5-a7f3-632794dee293_5b222251-554e-4a29-be72-d9e042c4c447/capture.png)
![Center console dashboard for SimRacing (Sheet metal + 3d printing) [V1]](https://media.printables.com/media/prints/396221/images/4798152_d6c5ef38-ca90-4960-8837-3bcc3c551eca_bcec7736-5641-45dd-b171-41597c885a89/20230929_182954.jpg)
