1 / 7
QUADMULA Siren F3 - IMRC Ghost Antenna Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 730
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3
To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90° and carefully insert the tube of the other part of the antenna in the other part of the mount and slowly slide in the white part.
RECCOMANDATIONS:
- Print with a nozzle not bigger than 0.4mm
- Print with a layer height not taller than 0.2mm
- Print with FLEX, TPU etc…
- In PrusaSlicer (and most other slicers) → Print Setting → Layers and perimeters → Avoid crossing perimeters: ON (to reduce stringing)
- Print with 100% Infill
- Print with at least 3 Perimeters
- Don't print with Supports