Creality K2 Plus Replacement Back Panel Standoff for Shipping Damage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple parts to replace damaged Creality K2 Plus back panel standoffs. Like many of you my new K2 Plus…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 47
- Makes
- 0
- Views
- 781
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple parts to replace damaged Creality K2 Plus back panel standoffs. Like many of you my new K2 Plus arrived with a little damage. I didn't even notice this was broken until I went to perform input shaping and the back of the machine started to rattle like crazy. The back panel must have been hit and it broke off several of the standoffs pressed into the sheet metal. I lightly glued these into the holes from the back of the panel and replaced the flat head screws with button head screws. Regular cap screws would work but you would need to add washers.
Update: I added a printable washer with a countersink that will work with flat heads.
Category: 3D Printer Parts