1 / 3
Magnets inserter 5x2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printing 3D models with magnets and tired of glue on your fingers and magnets jumping around?
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 40
- Makes
- 1
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The Magnets inserter tool makes adding magnets to 3D-printed models easy and mess-free. It helps you with perfect polarity alignment while keeping your fingers clean of glue. No more frustration—just precise, hassle-free magnet placement!
Print two tools using different colors. Manually glue (yeah, I know…) a magnet to the inner part of each “syringe.” Make sure to use opposite polarities between your two tools.
Now you can insert magnets into your 3D-printed model in 3 simple steps:
- Assemble the “syringe.”
- Place a magnet into the holder hole of the outer body. The magnet glued inside the inner body will keep it in place.
- Apply glue to the hole in your 3D-printed model where the magnet will go. Position the tool over the hole and firmly press the magnet in. While keeping the outer body in place, pull out the inner body. The magnet will stay in the hole, and you can now remove the tool.