Halvklart lithophane frame
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.35 – €0.43 net (excluding VAT)
For file: Halvklart_lithophane_frame_button_0.2mm_PLA_MINI_26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.39 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 25.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lithophane picture frame backlit by a USB Halvklart Spotlight
- Rating
- 5 / 5
- Likes
- 85
- Downloads
- 434
- Makes
- 2
- Views
- 4,025
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
100x100 mm lithophane picture frame backlit by a Halvklart Spotlight
What you need
- Printed parts (base, cover, button)
- Halvklart USB LED spolight
- 100x100 mm lithophane
How to print your own lithophane
Also, look under the section “Photos and lithophane"
From 2D to 3D. How to turn a picture or a photo into a 3d model
In summary
- Go to http://3dp.rocks/lithophane
- In Images
- Select or Drag and Drop your picture
- In Settings / Model
- Set Maximum Size to 100 mm
- Set Thinnest Layer to 0.4 mm
- Set Thickness to 2.4 mm
- Set Border to 2.5 mm
- In Settings / Image
- Set to Positive Image
- In Model
- Refresh and Download
- In Images
Print instructions
- It is a tight fit, make sure your printer is well calibrated
- All the parts are already oriented in the good position
- Print the parts in PLA or PETG
- Nozzle diameter: 0.4 mm
- Frame (Base, Cover and Button)
- Layer height: 0.2 mm
- Perimeters: 3
- Supports: None
- Brim: Maybe…
- Lithophane
- Layer height: 0.1 mm
- Perimeters: 1
- Solid layers Top: 1
- Solid layers Bottom: 1
- Infill: 95% Rectilinear
- Color: White
Assembly
- Insert the Halvkalrt LED spotlight on the back of the base
- Stick the button on the back of the Halvklart LED Spotlight
- Place the lithophane picture on top of the base
- Snap the cover on top of the lithophane