Filament Guide for RepRack RackRoller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer and filament guide for the RepRack RackRoller
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This model allows to properly space the RackRollers for most spool widths as well as serve as filament guide. You will need is a piece of PTFE tube which just fits through the center hole and is held by friction. The model is designed to print with no supports as long as your printer has decent part cooling for dealing with bridging/overhangs. Use the same screws as you did for RepRack to attach to the RackRollers. Using the inside holes on the rollers allows for quite a bit of adjustment for different spools. The same part can be used for front and back to keep it simple (obviously you do not need the PTFE tube on the back).