1 / 3
CRF450L Supermoto chain guard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sleeker chain guard designed for the CRF450L with Supermoto wheels installed.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
The purpose of this chain guard is design is to replace the stock chain guard with 17inch Supermoto rims as the stock one is too large and will come in contact with the rear tire.
Material used was PLA +
(A Higher temperature withstanding plastic may need to be use depending on your geographic location)
Infill used was 60%
requires 2x M6 countersunk screws
Note: make sure the M6 screws just barely protrude the threaded aluminum to prevent the screw from Interfering with the chain & sprocket.