798 models
This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…
I modified the 400 series latch file to match the 450 series. Printed on Ender 3v2 with brim and support touching buildplate, overhang angle 59°. Layer height 0.16mm and infill 100%. I set the supports touching the print and removed it…
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
Now comes in sizes up to 10! Took inspiration from the Battery Caddy, but in my opinion made it better. Here are my favorite features: Easy one handed battery removal Battery can be put in either way (positive side down or up) - use this…
Summary This is a model of a Smart 450 / ForTwo in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
Descripción: Este soporte ha sido diseñado para montar un ESP32-C3 Mini junto con un sensor LD2450 de manera compacta y eficiente. El diseño incluye una base redonda ajustable con sistema giratorio que permite orientar el sensor con…
I created this battery adaptor for my aqara motion sensor as I had plenty of CR2032 batteries but no CR2450. Version 2 is 4mm thick that fitted perfectly with the motion sensor. I have included the 5mm version for other applications.
Printable AA / 14500 Battery Holder: Designed to fit standard contacts measuring 10x9x0.3mm / 0.4x0.35x1/64", this holder features M3 countersunk screw fixation for added convenience. Tailored for DIY projects, it ensures secure storage…
My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
Gridfinity bin model that is capable of holding 2032 and 2450 batteries. Combined with Multiboard Gridfinity Adapters it is multiboard compatible as well. I use them to store rechargeable coin cell batteries that I bought from amazon. If…
Custom Dust Shoe for 500W 52mm Spindle Benefits: Provides excellent air stream and dust control. Simple and cost-effective to make. Easy to attach and detach thanks to the magnets. Still posible to change bits Materials Needed: 1x M4 x…
A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Print in TPU. Fits 1s 450-750 batteries.
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
Hi, It is my idea for shock-absorbing landing gear for quadcopter with F450 frame. 2 legs on opposite sides should be connected some kind of elastic cord, spring or maybe strong rubber band. It should absorb some of impact of hard…
This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it. I printed with 3 walls and Gyroid infill. No supports or brim. I have printed the one in…
Printing in TPU OR PETG 100% filling Original part: 43330KRNA70ZB
I needed an extra quick release plate and this seem to have been discontinued, so I drew up and simplified the one provided for my UT-43D II tripod with QHD-53B ball head. This replacement will fit a range of Velbon tripods (mostly of the…
Used to mount HDD's in various HP Machines. This replaces 'blue' HP Screws. Requires 8MM M3 screw to be put through the middle. Print instructions Unassociated tags: 6005 Pro, DC7800 790, HDD Screw, hp blue, hp screw Category: Computer
The mainboard does not seem to come with a Clip to arrest the M.2 Disk Drive in it's NVME slot - in case you need one: here's an option. Lock the holder on the bottom side of the mainboard by adding a regular metal M4 thread nut on top of…
I had one too many close calls with my quadcopter props, so I decided to design a prop guard. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Notes: Updated the design to limit the weight,…
Adjustable Case for ESP32 WROOM (38 pins) + LD2450 This case is designed to provide a functional and aesthetic solution for projects using an ESP32 WROOM (38 pins) and an LD2450 sensor. Key Features: Ventilated design: Hexagonal grille…
Asrock B450 Pro4 IO/shield. Category: Electronics
Holder for a single CR2450 coin cell battery. Battery is securely held in place Designed for use with breadboard jumper wires or bare wire Total thickness is 9.1mm Support free print Also check out my CR2032 holder .
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR2450 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
I misplaced the rails to mount HDDs into the trays of my server housed in the rosewill RSV-L4500, so I designed these and they fit perfectly. The spacing is standard so there is a good chance they'd fit in other trays. Category: Electronics
Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics
Just a simple corner and side/edge block for consistent placing of stock on the TTC-450 board. Uses the same M6 bolts as the clamps that follow with the CNC. Print for stiffness - I used PETG with 4 walls and 15% gyroid - and it seems…
This is a tablet mount for the Kove 450 Rally (Non pro version) that can be 3D printed. I am mounting a Samsung Tab A7 Lite in a rugged case with it in the lower position or an AMPS bolt pattern RAM Ball with a Garmin GPS or a Motorcycle…
Ive made this cup holder for smart 450 because i could not find one with 2 cup holders i even made a hole so you can put these cheap usb chargers from wish or ebay etc... it is expandable if you want to make your own thing to expand you…
Caps for the tow eyes on Smart 450s. It MIGHT fit other models, but haven't tested it.
Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
You can print models while standing. No supports are needed and it is printed nicely using a 0.3 mm layer height.
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Stützstrukturblocker sind zwingend erforderlich (siehe Bild). Mit der Nase nach unten drucken funktioniert wunderbar. Support blockers are absolutely essential (see picture). Printing with the nose down works wonderfully.
IO Shield for the Asus TUF Gaming B450M Plus motherboard, modelled in openscad.
65mm Makita trim router bracket for Two Trees TTC450 pro debranded from original found at Makerworld
Remix of MilStrata Manufacturing's CR2032 battery holder to hold CR2450 batteries. Thanks to RetroGameRevival for the Fusion360 wrangling.
This is a 1x3 Gridfinity bin that holds 15x CR2450 coin cell batteries. If you'd like it in a different size, let me know!
An adapter plate is required to mount a 500W spindle on a TTC450 milling machine from TwoTrees. The drill holes in the aluminum holder of the spindle have a distance of 57mm and 20mm On the backside, melt the M6 nuts into the plate using…
Battery case for 10 CR2450 coin cell batteries. Premade Remix from customizable Print in Place.
Gridfinity model for 10x CR2450 coin cells
This model is compatible with the lego system.
CFMOTO 450MT FRONT ABS sensor cover I also uploaded a version with the bottom part cut off for drainage. I haven't checked it yet.
Dvě varianty desky pro uchycení 500W vřetene s hliníkovou objímkou na CNC router Two Trees TTC450. Jedna deska pro vložení matic M5 a M6 druhá s tištěnými závity. Two variants of mounting plate to fix 500W spindle with alu collar to TTC…
0.1mm layer height. Print without support.
The case is designed to house ESP32 C3 Super mini modules with OR without pins soldered to it. The lid has two variations: Plain and with radar symbol. Features Space for the ESP32 C3 super mini and HLK-LD2450 modules, bluetooth antenna…
4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other
Replacement Spool for broken or lost Dymo LW 450 label spools. Prints in 3 Parts. Attach the disc with the hexagonal cutout to the spool - glue may be required - add the labels, then screw on the other disc onto the spool. Available as…
The stool measures 450x280x90mm. It is fully printed. You simply print out the same part twice and screw it together. In addition, the rubber pads should be printed from a flex filament to prevent slipping. The stool needs to be printed…
IO Shield that fits an MSI B450M PRO-M2 MAX
Small case for the ESP32 and LD2450 with mounts for 2 * 6x3 magnets. Prints without supports. I use this to hang it below my monitor and integrate presence detection in Home Assistant. Designed in OnShape, link here .
Double cupholder for the Delta Shifter Console for the Land Cruiser 80 - FJ80/FZJ80/LX450/etc. Fits an energy drink/soda can, and a Hydroflask. Matches the body lines of the console. Bolts in using 3 ¼-20 bolts. No real great way to print…
Easily printable IO Shield for the Gigabyte B450M DS3H motherboard. Even though I had no issues using this IO Shield printed in PLA I would highly recommend going for filaments with a slightly higher melting temperature than PLA like PETG…
DJI F450 Bottom plate for mounting FC with 30x30mm mounting holes Thanks to kjamimate Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook:…
This allows you to remove your air filter and cover the air box of the Kove 450 Rally so you can hose or pressure wash the bike down and not get water into the carb and motor. You need a 256mm x 256mm print bed for this to fit. Do not…
Remixed Case for ten 2450 Lithium Coin Batteries
This toy truck is based loosely on the F250? F450? It's pretty fun, and is safe for kids of all ages. The wheels are solid and there's no axle to snap! A smaller version with working print-in-place wheels suitable for older kids…
Spindle holder 65mm for CNC TTC-450 PETG
I recommend %100 infill for the struts and %5+ for the skid pipes. If you choose to print the skid nuts, I recommend printing them with TPU.
voditko retezu YAMAHA YZF450 chain Category: Vehicles
I recently bought Magcubic Hy450 and created a simple cover that fits perfectly and protects the lens, so I am sharing it. I hope you like it.
Storage for the tools and bits that come with the TTC-450 CNC along with TwoTrees extra bit set and also any other 3.175 and 6mm bits. Note that the tolerance on the bits holders are tight - I didn't want any chance of the bits falling…
I needed a convenient place to put the switch for my auxiliary lights. This mount hooks into the front screw and indexes on a slot on the underside of the left controls to stop rotation Including the fusion file in case you want to remix.…
This is an IO shield for a GIGABYTE B450M DS3H micro ATX motherboard. Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues. If this model is useful to you, consider checking out my YouTube…
One of my favorite sculptures, on display at the Liebieghaus in Frankfurt, Germany. 3D scanned using Polycam, cleaned up in Blender. Printed with Silk PLA and Marble PLA .
You can buy these from me here! Consider supporting us on Patreon! These AA and 14500 battery holders with a screw lid are incredibly tough and rigid! Designed for use with protected, unprotected, button-top, and flat-top cells. Print the…
The borders on the cutout part might be a bit thin. I did my best, so consider this a proof of concept . Modifications made using Tinkercad.
IO Shield for AMD AM4 Asus PRIME B450M-A Micro ATX Motherboard. Recommend PETG or PCTG.
Never drag your payload again! This set of 3D models are a direct fit for the original landing gear that come with the SK450 from Hobbyking (or elsewhere). They use the same mounting system as the originals, so they require the use of the…
Another second-hand case where the seller didn't send the IO shield. I couldn't find a free download anywhere on the internet, so I came up with a nice design using my old designs and another similar MSI model IO shield. Just using…
Case for ESP32 C3 Super Mini and LD2450 with USB C Connector. Backplate snaps in place. added an inlay for the case as the red led shines through white filament 2025/07/04: added ceiling mount, requires 1x m3s threaded bushing
I designed this to charge a 14500 cell (vapcell H10) with an xtar PB2S charger while traveling. The positive contact is a 16mm M3 screw. Of course charging a liion battery with too much current can be dangerous and since the PB2S doesn't…
Light weight remake of the original for better flight time. Print Settings Printer: DMS create Rafts: No Supports: No Resolution: nozzle 0,4mm with layer height 0,2mm Infill: 10% Filament: - PLA Notes: Printed upside down for better…
***This is an updated version of the original which functioned perfectly in testing at the shop with dummy ammo, but failed to lock the magazine back in live fire. The changes are small enough that I've not updated the photos, but the Mk2…
Plate to attach 65 mm CNC spindle holder from Aliexpress to TTC-450 machine. Designed for holders that use 80x25 mm mounting hole distances. This plate is thick for a reason! You need a specific distance from the router to the machine so…
65mm Makita trim router bracket for Two Trees TTC450 pro. shorter distance between holding plate and milling cutter center. Overhangs have been removed as far as possible I printed the adapter from PETG. Layer height: 0.2mm Number of…
3 separate pieces print what you need! :) SPINDLE CLAMP for 65mm trimmer (MAKITA, KATSU, CLONE etc) for CNC Twotrees TTC450 DUST SHOE for ALL 65 mm trimmer Suction ADAPTER (internal diameter 39.2 mm external diameter 43.2 mm) designed to…
I was tired of buying the expensive CR2450 batteries for my smart home devices. Now you can use AA/AAA batteries instead! Don't mind the cables – I stripped them to the wrong length and just went with it. 😅
This is a tool tube for the CFMoto (Ibex) 450MT. It has been customized to store the Icon mini ratchet & extension, Harbor Freight 1/4" 8/10/12/13mm sockets, and up to 10 hex bits. Inspiration came from the design on Uncle Wang's Shop.…
Ein einfacher Powerbutton für Garmin Oregon 450. Er muss mit TPU oder Flex Material gedruckt und dannach eingeklebt werden. A simple power button for Garmin Oregon 450. It has to be printed with TPU or Flex material and then glued in…
An Air filter cover for the Honda CRF250R, to protect it from water during washing and from dust during long term storage or transportation. Its designed with a long lip in case you wanted to add any sort of sealing material like window…
Underbody protection to keep debris out of the cab, and to protect the lower edges of the body. Optional running boards and front fenders attach to the side plates. Update (May 27 2021): Added two smaller files for those with smaller…
This is a remix of the presence sensor originally designed by @FSquare_1622667. I made a few tweaks to suit my needs: Replaced the original screws and inserts with plastic screws (I didn’t have the metal ones at home). Thinned the walls…
I liked the design, but the mount for the apm was a little flimsy and a little small. So I took two items and mated them together. I also made the top plate 3mm instead of the original 2mm to add additional strength. There is also a file…
Guarda Lama CF Moto 450 MT
This model is a 1-1/8 in. riser for use under the base of a Holley 4500 Series Dominator Carb. Designed for use with the 1050cfm model. I printed the file with Nylon-CF with 25 percent gyroid infill 0.2mm layer lines and 4 walls. To…
This is the "Chicken Head" wheel cap for the Smart ForTwo (450). Might work on other models, but I haven't tested it.
14500 Battery Case Do you have some 14500 batteries and need a case for them? Well then look no further for this is a 14500 battery case! Its perfect for keeping up to two batteries together in a handy case so you dont need to worry about…
Printed in PETG. 0.1mm layer height. No supports needed. This a CR2450 battery holder. It was originally designed for use inside a Zojirushi rice cooker. There is a battery hard soldered inside the rice cooker that powers the internal…
this is a 3D-printed canopy remix of the Bell Ranger 206, designed to fit the Tarot 450 pro helicopter Based on the original Bell Ranger 206 by Heli Printed. Full credit to Heli Printed for the base model. Print info: STL files included…
CFmoto 450MT (IBEX) Screen Sunshade added supports best ironing of top surfaces make it look nice and smooth. 0.12 layer height may be to much but I printed it that way. 0.2 should be strongest, faster to print but of course layers will…
![MSI B450M-A [A320M-A] PRO MAX IO SHIELD](https://media.printables.com/media/prints/4473f74d-ef70-41f1-8342-33365d03dc83/images/10909405_7f874eb5-c4e6-43da-848d-dd0e018cd8ad_15f32e9b-0376-414d-8d81-ce77bddd999a/img_3857.jpg)
