Motor adapter for CNC milling machine TTC450
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate for mounting a 500W spindle motor on a milling machine TTC450 from TwoTrees
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 300
- Makes
- 0
- Views
- 1,545
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
An adapter plate is required to mount a 500W spindle on a TTC450 milling machine from TwoTrees. The drill holes in the aluminum holder of the spindle have a distance of 57mm and 20mm
On the backside, melt the M6 nuts into the plate using a soldering iron.
The 4 long M6 screws must be 65mm long and with one or two washers. Make sure that these screws are not too long.
Filaments that are printed at a high temperature, ASA etc. are suitable for printing. Milling with aluminum is the best, but printing is also possible
Slicer settings: very strong, 80% infill, 4 walls etc.