Motor adapter for CNC milling machine TTC450
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter plate for mounting a 500W spindle motor on a milling machine TTC450 from TwoTrees
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 300
- Wydruki
- 0
- Wyświetlenia
- 1542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
An adapter plate is required to mount a 500W spindle on a TTC450 milling machine from TwoTrees. The drill holes in the aluminum holder of the spindle have a distance of 57mm and 20mm
On the backside, melt the M6 nuts into the plate using a soldering iron.
The 4 long M6 screws must be 65mm long and with one or two washers. Make sure that these screws are not too long.
Filaments that are printed at a high temperature, ASA etc. are suitable for printing. Milling with aluminum is the best, but printing is also possible
Slicer settings: very strong, 80% infill, 4 walls etc.