2020 extrusion profile with print support and panels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2020 extrusion compatible profile with support for reliable printing and panels to build a rack.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 40
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Due to some issues with printing 2020 profiles for my rack I started to design my own profile with print support.
By adjusting some parameters else well (see tips) you can use the full height of the printer (at least there is a good chance).
In combination with cube-connector-for-2020-extruded-aluminum-profiles you can easily create racks.
print tips
support
- enable / add brim for the support only and set the brim width to 2.6 mm.
- 2 perimeters
- 25 % cubic infill
profile
- four perimeters
- 0% infill
- Five bottom and top layers
- adjust the height of the profile by setting the Z-scale factor.
- additionally you could set the acceleration to lower values ensure smoother movements and less forces
panels
I just created some basic panels to upload here. For my own I used a parametric Fusion 360 project, but it is not so sophisticated that I want to upload it right now. Please text me / comment for additional dimensions.
The panels are designed for the cube-connector-for-2020-extruded-aluminum-profiles, but will work with aluminum profiles else well.