2020 extrusion profile with print support and panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2020 extrusion compatible profile with support for reliable printing and panels to build a rack.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Due to some issues with printing 2020 profiles for my rack I started to design my own profile with print support.
By adjusting some parameters else well (see tips) you can use the full height of the printer (at least there is a good chance).
In combination with cube-connector-for-2020-extruded-aluminum-profiles you can easily create racks.
print tips
support
- enable / add brim for the support only and set the brim width to 2.6 mm.
- 2 perimeters
- 25 % cubic infill
profile
- four perimeters
- 0% infill
- Five bottom and top layers
- adjust the height of the profile by setting the Z-scale factor.
- additionally you could set the acceleration to lower values ensure smoother movements and less forces
panels
I just created some basic panels to upload here. For my own I used a parametric Fusion 360 project, but it is not so sophisticated that I want to upload it right now. Please text me / comment for additional dimensions.
The panels are designed for the cube-connector-for-2020-extruded-aluminum-profiles, but will work with aluminum profiles else well.