AMD GPU Spacer withtTranslucent logo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My GPU was sagging and I printed a spacer with a translucent AMD logo to work with the GPU RGB.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
My GPU was sagging and I needed a spacer to place between the end of the card and the computer case.
I printed a spacer, and also added and AMD Logo section than could be lit up via the GPU's RGB.
To get the logo to shine through I imported and SVG of the AMD logo into my modeling software and created a 0.4mm wall section. Be sure to have thin walls enabled in your slicer. I used Atomic's Marble PLA+
To get the logo SVG I downloaded a hi-res AMD Logo image from the top google results. I modified and simplified the image using Paint.NET. I removed all extra color, canvas, and resized the image to be easily referenced in my modeling software.
I might re-print to get to logo flush against the GPU RGB logo and try other filaments.