AMD GPU Spacer withtTranslucent logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My GPU was sagging and I printed a spacer with a translucent AMD logo to work with the GPU RGB.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
My GPU was sagging and I needed a spacer to place between the end of the card and the computer case.
I printed a spacer, and also added and AMD Logo section than could be lit up via the GPU's RGB.
To get the logo to shine through I imported and SVG of the AMD logo into my modeling software and created a 0.4mm wall section. Be sure to have thin walls enabled in your slicer. I used Atomic's Marble PLA+
To get the logo SVG I downloaded a hi-res AMD Logo image from the top google results. I modified and simplified the image using Paint.NET. I removed all extra color, canvas, and resized the image to be easily referenced in my modeling software.
I might re-print to get to logo flush against the GPU RGB logo and try other filaments.