1 / 7
Festool RTS 400req interface for Festool delta sanding pad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An interface for the Festool RTS 400req to fit the delta sanding pad.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my Festool RTS 400 REQ which is for 130x 80mm² sanding paper, I bought a delta sanding pad, assuming that it would fit. I was wrong. The RTS 400REQ en DTS 400 REQ have a different base.
I made an interface for the machine to mount the delta sanding pad. You need 4 m4 screws with countersunk head to mount the interface on the machine.
Known issues:
- The threads in the interface are m4/0,7mm, but are too tight. I haven't fixed that. Tap the holes (preferable with a machine tap).
- I haven't used it much yet, but I am a bit concerned abouth the strength and stifness of the material. I used PLA, but I think there are better filaments to use (maybe with glass fibre).