1 / 1
Eccentric Motor, housing and base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cone winder with an eccentric motor modification
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had an eccentric motor so I built a slightly different base. You'll find 2 items, first is a new base with the old motor housing removed, and 4 screws for a m3 heat insert, and the second is the motor housing at the correct height for the gears.
Designed for this eccentric motor https://www.amazon.co.uk/dp/B0745YDSJS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Gearbox Size: 37 x 23mm (1.46" x 0.91") (D*L)
Motor Size: 36.2 x 33.3mm (1.43" x 1.31") (D*L)