JST-XH mounts for 2020 rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount JST-XH connectors to a 2020 extrusion - making tidy wiring!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 48
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A simple printed mount for three 2-pin, or three 3-pin, JST-XH connectors. I used one to keep the fan wiring under my Voron Trident bed tidy. Then I could run a single fan power cable up from the electronics bay, and have connectors for each bed fan.
Print standing on end (as shown in CAD picture), as this way you won't need supports!
Solder together the three connectors, taking care to keep them tight and aligned. This assembly will then slide nicely into the print. It is a friction fit - but not so much it wont come back out or make the connectors difficult to disconnect.
Mount to the extrusion using an M3 screw and a tee nut.