1 / 3
GPS mount with integrated central light mounts for Canyon Ultimate/Aeroad or Grail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GPS mount with integrated mounts for "be seen" light, plus an optional main light, for Canyon Ultimate/Aeroad or Grail
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 686
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The GPS mount offers with two integrated light mounts:
- Integrated slot fits a Lezyne Strip Drive “light to be seen”
- Additional mount point allows attaching a mounting bracket for other lights (Lezyne Lite Drive 1000XL or Lezyne Lite Drive 1300XXL) as a “light to see with”
Two versions are available versions for two types of cockpit:
- for Canyon Ultimate or Aeroad (CP0018 Cockpit)
- for Canyon Grail CF SL (2024), cockpit without the gear groove
Each cockpit version is available for two types of “be seen” light:
- for the newer Lezyne Strip Drive+ 700
- for the older Lezyne Strip Drive Front
Required hardware for the GPS mount iteself:
- Garmin quarter turn insert
- M3x6 and M3x8 bolts to mount the quarter turn insert
- two M4 bolts for the cockpit mount points
Additional hardware required for the secondary light bracket:
- M3 locknut
- M3 washer
- M3x30 bolt
The secondary light bracket is attached to the Lezyne Lite Drive instead of the rubber strip, using the original bolt
Printing notes:
- Print everything lying on the side
- Make sure the GPS mounts are oriented flat on the bed
- Supports are required for the GoPro-style attachment point, paint-on-support suggested
- Use plenty of perimeters (I use 7 perimeters and 40% infill)
- Printing in ABS is highly recommended, as ABS allows for some slight flex and is not prone to brittle failure!