1 / 3
GPS mount with integrated central light mounts for Canyon Ultimate/Aeroad or Grail
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GPS mount with integrated mounts for "be seen" light, plus an optional main light, for Canyon Ultimate/Aeroad or Grail
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The GPS mount offers with two integrated light mounts:
- Integrated slot fits a Lezyne Strip Drive “light to be seen”
- Additional mount point allows attaching a mounting bracket for other lights (Lezyne Lite Drive 1000XL or Lezyne Lite Drive 1300XXL) as a “light to see with”
Two versions are available versions for two types of cockpit:
- for Canyon Ultimate or Aeroad (CP0018 Cockpit)
- for Canyon Grail CF SL (2024), cockpit without the gear groove
Each cockpit version is available for two types of “be seen” light:
- for the newer Lezyne Strip Drive+ 700
- for the older Lezyne Strip Drive Front
Required hardware for the GPS mount iteself:
- Garmin quarter turn insert
- M3x6 and M3x8 bolts to mount the quarter turn insert
- two M4 bolts for the cockpit mount points
Additional hardware required for the secondary light bracket:
- M3 locknut
- M3 washer
- M3x30 bolt
The secondary light bracket is attached to the Lezyne Lite Drive instead of the rubber strip, using the original bolt
Printing notes:
- Print everything lying on the side
- Make sure the GPS mounts are oriented flat on the bed
- Supports are required for the GoPro-style attachment point, paint-on-support suggested
- Use plenty of perimeters (I use 7 perimeters and 40% infill)
- Printing in ABS is highly recommended, as ABS allows for some slight flex and is not prone to brittle failure!