1 / 1
UBBI Filament hub 4x with mechanical sensor holder and printable holes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UBBI Filament hub 4x with mechanical sensor holder and printable holes
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 1
- Views
- 452
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- print without supports as modelled
- body - 0.12mm layer height
- cover - 0.2 mm layer height
In case you use tubes with OD4mm/ID2mm, you can use pins for security (against tubes slide out). Insert all 4 tubes as far as is possible (approx. 16mm deep), then use 2.5mm drill and go through one of the pinholes (or both). Remove drill and insert 2.5mm pin. The tubes should be secured well.
edit:
19.02.2025 - sensor position tuning
01.03.2025 - added 2mm to length of the 4 tubes
15.03.2025 - added longer version with 2 security pinholes