1 / 3
Steam oven door vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Specifically for a Siemens CP565AGSOB Steam microwave/oven. Print a pair to prop the door open so the oven can dry.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 396
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The steam oven/microwave combination is useful, but due to the cavity being completely air/water sealed, we find this is always damp inside. The springs on the door make it impossible to leave just slightly ajar, hence two small props to serve the purpose of allowing drying. When not in use, the clips can be stored behind the handle.
Modeled in blender. Print with enough wall thickness that the internal braces join up (although it should be plenty strong enough without these really).