323 models
This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, … On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the…
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Mit diesem Werkzeug kann die Brüheinheit des Siemens EQ 9 Kaffeevollautomaten bewegt werden, was die Reinigung und Wartung vereinfacht. Es ist keine Unterstützung nötig. Google translator With this tool, the brewing unit of the Siemens EQ…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
english On our Siemens egg boiler, which is over 20 years old, the egg support has practically disintegrated over time due to heat and lime exposure. I traced the part, which is no longer available as a spare part. In several development…
Print approx. €16.83–€20.58 excl. taxPreliminary estimate for one variant
This model was designed to be easily printable on a Prusa Mini+ . For this reason, the overall dimensions are optimized for the build volume of this printer. Another key design goal was to allow printing with as few supports as possible.…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
The nozzle connects the hose to the vacuum cleaner. According to multiple websites it is compatible with devices from Siemens, Bosch, Grimi, Krups and Pitsos. For 35 mm Ø hose (Hose outer diameter 40mm). I personally used it for the…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for one variant
Replace wear DIN rail mounting clip for Siemens S7-200 PLC. Plastics with age become brittle and break. This is a simple part for printing with 3d printer. Print Settings Rafts: No Supports: Yes Infill: 100 Filament: Any PETG
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…
Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant
TL;DR A broken plastic part with less than 1 g has been redesigned and 3D-printed, thus avoiding 975g of garbage in the form of a defunct mixer. Machine to repair Our Siemens hand mixer MQ90001/02 broke about 3 years ago. Thanks to the…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I did this O scale model of the Venture Siemens Vial Rail Car. If someone is interested to make it, let me know. I can do a sketch with numbers to indicate where to fix each decal. For a O scale, the carbody needs to be printed in 3 parts…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Ersatzteil für eine gebrochene Kupplung zwischen Drehknopf und Thermostat für Siemens Elektroherd HE330550/01. Ist, wie am weißen Originalteil zu sehen, ein Mitnehmer abgebrochen hat die Kupplung zu viel Spiel und die Temperatur lässt…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
This is a replacement for the Siemens Vida MRI paper holder. Image: Left: Original in white, already broken; Right: Printed part in black PLA, fitted into the original railing piece The original breaks easily and often, but repair is very…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
Replacement roll of the basket.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Nachdem meine Reinigungsklappe nicht mehr richtig verriegelt wurde habe ich den Riegel neu erstellt. Jetzt lässt sich wieder der Spülvorgang ohne Probleme durchführen. Der Riegel wurde in PETG gedruckt mit einer Schichthöhe von 0,1mm. Den…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
This is not an official product! I didn't like how the Google Home had the tendency of moving around on the coffee machine, scratching it up and potentially falling off, especially if you're listening to bass-heavy music over an extended…
Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant
This is a versatile, parametric tube holder designed to securely hold the milk frothing tube of the Siemens EQ.6 espresso machine, but adaptable for many other uses. The inner diameter is set to 6.95 mm with a 0.1 mm clearance, making it…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Last congress, my DECT fell one too many times out of my pocket. Unfortunately belt-clips are no longer available for this model, so I designed my own in FreeCAD. Rather than a belt-clip, this clip is designed to be used with a carabiner…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Nachdem der Schlitten meiner Brotmaschine gebrochen ist, habe ich einen neuen designt, der auf die Führungen der Siemens Brotmaschine (MS65000/02) passt. Filament: PLA (lebensmittelecht) ziemlich viel Stützstruktur notwendig und…
Print approx. €19.50–€23.84 excl. taxPreliminary estimate for one variant
Spring cover for the brewing group of Siemens EQ 6, 7 and 8 coffee maker Federabdeckung für die Brühgruppe der Siemens EQ 6, 7 und 8 Kaffeemaschinen Print with support / ;it Stützmaerial drucken
easy for programming HMI panels without breaking cables
I have a Siemens EQ 700 coffee machine (TP705R01). The coffee bean container only allows for 350gr of coffee, which is inconvenient since the beans come in 500gr bags. So I made an adapter to enlarge the capacity. Unfortunately the size…
The model can be printed without supports. Maybe just rotate and print. I printed it with 0.2 mm layer height The extensions are stackable PLA or PETG
Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…
Replacement wheel for Bosch, Siemens & Neff dishwashers. Print as solid using a high perimeter count. Print using a strong and temperature-resistant material (PETG, ABS, ASA, PC, NYLON, etc.). The part that inserts into the wheel and onto…
DE: Gerätefuß für Trockner, passend für Bosch 00611942 Passend für folgenden Marken/Hersteller: Bosch Balay Constructa Siemens Neff Gaggenau Lynx Pitsos Profilo Viva Artikel-Merkmale: Gummi-Ø: 27 mm Gesamthöhe: 52 mm Farbe: weiß Material:…
I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.
Held in the air by the pure willpower of Werner von Siemens himself. -- Not officially affiliated with Siemens --
Created with Siemens NX 12 Printed with Creality Ender 3 in PLA Print time with 0,4mm Nozzle: ~3h PS: It works, but the model fits not perfectly! It was designed rather quick and dirty ;-)
Made an extender for the bean container for my coffee machine, so i don't need to refill it so often, print in a food grade plastic.
Werkzeug zum einfachen Wechseln des Wasserfilters für Kaffeemaschinen der Siemens EQ Serie. Tool for easy change of the water filter for Siemens EQ series coffee machines. Print instructions Category: Kitchen & Dining Summary Werkzeug zum…
Stand for Siemens MTP Unified HMI panels. Useful for programming at the desk. Fits 7" to 15" panels, maybe larger as well without the stabilizer. The stabilizer bar is optional, but prevents the stand from sliding apart by accident. Fits…
Diese Schraubhilfe benutze ich regelmäßig beim Reinigen der Brüheinheit des Siemens-Kaffeevollautomaten EQ9. Es erleichtet die Handhabung doch erheblich. I use this screwing aid regularly when cleaning the brewing unit of the Siemens…
The ÖBB 1116 is part of the Siemens ES64U2 family of electric locomotives. It is also known as the Taurus and is widely used in Austria. This is one of the first 3D models I created in Blender, so there are still some minor issues. Some…
Model of the Siemens Venture passenger car currently being introduced and used across multiple railroads in North America. The model configuration is based on the Amtrak Midwest exterior and interior. Other railroads may use the same car…
I found the original version very good but I wanted to make the nacelle and the base more realistic. I have re-drawn only 3 files for the others take all the original files. The modification was made with fusion 360 then with Tinkercad.…
Add one liter volume for extra coffee beans Category: Kitchen & Dining
Modeled after original best to print in PETG for that flex much easier to install i printed it on side with brim supports needed.
Eierhalter für Siemens und Bosch Kühlschränke
Halterung für Bosch/Siemens Geschirrkorb/Bodenkorb/Korbeinsatz Keine Ahnung, wie diese kleinen Plasteteile heißen, aber bei mir waren die kaputt und zusätzlich noch ein Stück der Geschirrhalters abgerostet. Und für über 30 Euro neu kaufen…
An Addon i created for the EQ9 s700 Coffee Machine. It nearly triples the Coffee which is hold in the Machine. Happy Printing Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: .2 Infill: 10%…
These are specially designed for 3d printing reinforced replacements for the old and new versions of the BOSCH/SIEMENS/MIELE refrigerator door hinge bushing (00169301, 5384490). The bushings have built-in supports which have to be broken…
no special instructions here. I printed it without supports, 0.2 layer height in Prusament PLA royal blue additional notes I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to…
This needs to be printed upright to make sure the screw positions are strong enough. I used 4 perimeters, added a sheath around the supports and a brim.
My fridge only came with two small egg trays, new ones of the same type were kind of expensive so I made a quick model
It is a waste of money (23 euro incl shipping) and material to buy a new drip tray, because it is only for the looks.
This model replaces the wheel of a Siemens Z3.0 vacuum cleaner. Measurements All measurements shown in mm. Print Settings The model is split in half for better printability, it needs to be printed twice. Print preferably in ABS with 4…
Nach dem Öffnen der Datei im Slicer bitte das Objekt in Teile teilen, um Buchstaben einzufärben.
Information This elevated PLC desk stand is engineered to enhance the functionality and accessibility of Siemens S7-300 PLCs in a desk-based environment. This stand employs the original S7-300 series rail, offering a secure and stable…
This is a functional replacement clip for a dishwasher. Update: This version features a thicker baseplate and a reinforced transition between the base and the bent spring section for increased durability. Material & Print Settings:…
EN Handle for Siemens EQ6 Coffee Machine Water Tank The brief and basis for this project was a "handle" with one end broken off. I measured and considered how to design a model that has "no flat surfaces" – it's a truly complex shape. By…
It’s designed to fit common Siemens and Bosch fridge door shelves, like the one in the Siemens KG49EDI40 and similar models. No tools needed: just slide it in and snap it into place by turning it to fit. Perfect for stopping your mustard…
One Rail insert for the left and one for the right side. The door holder brake on the weakest position because the original material ( Polystyrol) is only suitable for -10°C. Use PETG - it should hold up to -40°C Use supports everywhere…
Stand for SIEMENS (HMI) KTP 400 Basic
A simple reconstruction of the gearspringcover for Siemens EQ 5 and 6 coffee machines (probably fits other models too) Photo shows an older Version, but it should give you an idea of the printed part I would recommend to print it in hard…
Box for Siemens KTP400 HMI panel and proximity card reader. ITEM aluminum profile bracket included. It contains three sets - custom box, back and holder parts. Print instructions výška vrstvy 0.2 mm, výplň 20% GYROID, materiál PETG.
A mushroom-style momentary push button for Start/Stop/E-stop applications. 10-24 thread, 2-3/8" overall diameter. Blender file included. Category: Replacement Parts
A cover needed when cleaning a dirty radiator in a tumble dryer. 6 screws are required for assembly. I used 16mm long sheet metal screws. Printed it in ABS, 15% infill.
Update: Rechten Bohnenbehälter mit Aussparung für den Pulverschacht hinzugefügt. Bohnenbehälter für einen Siemens EQ 9 Vollautomat. Dieser ist passgenau, das bedeutet das der Behälter fest auf dem Originalbehälter aufsitzt und der Deckel…
My new Bosch fridge came only with a single, rather flimsy tray for 7 eggs. As I needed space for more eggs, I've designed my own. I've designed it for my Bosch KIR24NFF0, but it should probably fit for most Bosch/Siemens models with the…
ok 3rd time uploading and describing this thing (Thanks Thingiverse's glitchy interface) So... This is an Ear Hook for a Siemens Signia RUN SP behind the ear hearing aid. My wife is very hard of hearing and we bought a Siemens RUN SP…
Completely redesigned Gearspringcover model with a lower risk of breaking fixed wings that hold the cover in place.
Ein Kaffeebohnenbehälteraufsatz, der die Füllmenge des Bohnenbehälters erweitert. Die, die ich zum download gefunden hab, passten entweder nicht, oder sind so bescheiden, das man sie zT nicht drucken konnte… Lange rede, kurzer Sinn:…
Vergrößerung für den Bohnenbehälter eines Siemens Kaffeevollautomaten EQ.9 Der Adapterring hat eine Höhe von 30mm und wurde so perfektioniert, dass dieser mit der zusätzlich gedruckten Dichtung aus TPU von Amazon, ohne verkleben fest auf…
Leider ist der Originaldeckel meiner Kaffeemaschine schon so deformiert, dass er nicht mehr richtig schließt. Der Ersatz ist bis 70°C getestet, spülmaschinenfest. Material TPU95 Layerhöhe 0,2 mm Infill 25 % Support 0% TPU A95 von 3DJake…
This is a replacement for Siemens Door Bin ("Kühlschrankeinsatz"). The siemens replacement part number is 359341 - which is no longer in production. I own a KG36E05/02-V04 fridge. According to the documentation, the part also fits for the…
Spare gear for Bosch/Siemens meat slicers
Solution for repair of Siemens S7-300 PLC cards. Frequent breaking of the hooks on the card attachment leads to many reliability problems. The solution is not complicated but functional. Print Settings Rafts: No Supports: No Infill: 100…
Under Desk PC Holder für Fujitsu Siemens.
[CZ] Stojan na DIN lišty s úchytem pro panel Siemens LOGO! TD Stojan na DIN lišty (původně : https://www.thingiverse.com/thing:3433772 ) doplněný o montáž pro ovladací panel Siemens LOGO! TD s možností přidání vastního textu. [ENG] DIN…
Tool designed to easily remove the salt cap on NEFF or Siemens dishwashers Print instructions Category: Hand Tools Summary Tool designed to easily remove the salt cap on NEFF or Siemens dishwashers Print Settings Printer Brand: Creality…
Replacement for the original part
A whole testet fridge shelf for Siemens fridges. Would print with brim, and you will need a quite large printer. Normal print settings should work well, just enable tree supports 👍.
The red part of a Siemens EQ.6 Plus S100 Coffee Machine tends to break. Now, You can print the replacement part. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: Doesn't Matter Category: Kitchen & Dining
We have a Siemens VS06G2410/03. And lately 2 of the 3 wheels broke. Unfortunatly I have no ABS here (just PETG + PLA) and i wanted something like rubber wheels (because of our laminate). Therefore i took the freecat model from andy and…
Permet de maintenir une perche universelle plus large que celle d'origine
I didn't want to spend another 17euro on these little spacers that you need to install the dishwasher. These are the plastic components of the Bosch mounting kit (part number 00622861 / 622861). These parts are used to mount a dishwasher…
Fix for the broken door lever at our Bosch Logixxx 7/4 Washing machine with dryer. The replacement part number is 00649193 . So it could work with other compatible appliances. Provided STL is suitable to mount with 12x3 screws for…
Siemens display holder HMI TP 700 HMI KTP 700
A holder for the SIEMENS EQ.6 series 300 (and probably other models) to be able to hold taller mugs and thermoses (up to 19cm). If you find another model that it fits, please tell me in the comments :) Print Settings Printer Brand: Prusa…
Use cases : This is my creation of a grain tank extension for a SIEMENS EQ500 machine. With this addition you can put up to 1kg of coffee in the machine. Impression : PETG for food contact. Please give this design a like if you like it,…
Sometimes the brewing unit will get jammed. This keys makes it a lot easier to open the brewing group to rinse it on the inside.
This tool is designed to help remove the round glass lamp cover found inside many Siemens, Bosch, and similar ovens. Over time, heat and grime can cause these covers to get stuck — and turning them by hand becomes a real challenge. This…
A door shelf of our Siemens refrigerator went to pieces. After I saw the prices for a replacement part, I have unceremoniously constructed and printed one. The mechanism for the height adjustment (fourth picture) I have further used. Has…
Clip on Rail for retrofits to mount S7-1500 Siemens SPS components on a old S7-300 rail. Toolless mounting via clips. Can be used to remove a whole SPS assembly. Use two or more for longer rails. (Be careful with using screws to secure…
Siemens EQ.300 Coffee Hopper Extension 10&20mm versions
This is a replacement hinge for a Siemens standing freezer. The top right hinge of my freezer broke and I could not find a replacement part. So I removed the left hinge, put it on a flatbed scanner, scanned it, imported the image into…
This 3D-printed stand is designed to securely hold a Siemens Unified Panel. It allows the panel to be used or displayed without the need for permanent wall or cabinet mounting. Possible use cases: Exhibitions & presentations: Showcase…
DE: Fix für gebrochenes Saugrohr/-schlauch des Siemens BSH Staubsaugers (Modell VBBS10Z5V0): Defekte Kunststoffteile entfernen vom ursprünglichen Rohr/Schlauch. Vier 3-mm-Löcher in den verbleibenden Abschnitt bohren. Das gedruckte Teil…
Somfy Smoove controls do not fit into the Siemens Delta switch series normally. The official adapter from Siemens is working but looks not good and is very expensive. In my case I mount my Somfy Smoove controls aside to already existing…
Didn't like the original model, so i maked
This is a very simple solution to repair a broken hinge of a lid in the interior of a Siemens freezer or fridge. On my freezer the lid and the hinge broke due to abuse / wear and tear. The lid was always falling off, so I first designed a…
Ersatzteil für Klappstachelreihen Klammer vom Geschierspülmaschine von Siemens. UPDATE 17.09.2023: Klammer wurde überarbeitet.
This is the cog near the endless screw in siemens porshe cayenne's sunroof
The Siemens EQ.6 is a really wonderful fully automatic coffee machine. Unfortunately, the distance between the coffee outlet and the cup plate is somewhat large, so that with flat cups, coffee is often sprayed. This adapter reduces the…
Hey! This is just a simple handle that I made for our coffe machine - Siemens EQ5. So far working just fine.
This custom-designed 3D-printable mount allows you to securely attach a Fujitsu Esprimo Q556 mini PC under your desk for a clean and space-saving setup. It ensures a snug fit while keeping all ports easily accessible. The bracket is…
Replacement of Siemens microwave oven knobs (originals (Pekalit) broke out at shaft). Small nose for scale printed as separte part to enable easy usage of different material a have an nice, sharp contrast. I used PETG (black) for the main…
add a suitable gasket to the fitting suitable for these dryers listed in this link: https://www.kupaoprav.cz/servisni-sada-odnimatelna-dvirka-kondenzatoru-do-susicky-pradla-bosch-siemens/
