Removal Tool for Oven-Lamp glass Neff / Siemens
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removal Tool for NEFF / Bosch / Siemens 68mm Oven-Lamp glass
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 458
- Makes
- 5
- Views
- 1,246
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, …
On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the cover glass for the oven-lamp is sometimes hard to remove by hand, since it's hard to grap, burned in and sometimes greasy. I even heard from peoples who gave up and took a flashlight instead, to check the progress of their food.
Yes, there is a original tool for this, which can be purchased, but why to buy something, when you can print it.
I kept the design pretty close to the original tool with part No. 613634.
Print Instruction:
I used PETG, but other materials might work, too.
For stability reasons, I set 3 Perimeters, and 30% infill
I used supports, but it should work without, too depending on printer and filament.
All these setting are made in the pre-sliced 3mf file.
| Version | Date | Change log | Slicer |
| 1.0 | 04. Jan. 2024 | first publish | PrusaSlicer Version 2.5.0 |