1 / 3
Removal Tool for Oven-Lamp glass Neff / Siemens — zdjęcie 1
1 / 3

Removal Tool for Oven-Lamp glass Neff / Siemens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

3,50 € – 4,27 € netto (bez VAT)

Dla pliku: bsh-tool-similar_613634_0.2mm_PETG_MK3S_4h4m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 3,89 € netto (środek widełek).

Masa podana przez autora
48 g
Czas druku podany przez autora
4,07 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Removal Tool for NEFF / Bosch / Siemens 68mm Oven-Lamp glass

Ocena
5 / 5
Polubienia
18
Pobrania
458
Wydruki
5
Wyświetlenia
1246
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a printable model of a removal tool for a round oven-lamp cover glass with 68mm outer diameter, and 44mm height, used in various ovens by Bosch, Siemens, NEFF, …

On some ovens from the BSH Group (Bosch, Siemens, NEFF, …), the cover glass for the oven-lamp is sometimes hard to remove by hand, since it's hard to grap, burned in and sometimes greasy. I even heard from peoples who gave up and took a flashlight instead, to check the progress of their food.
Yes, there is a original tool for this, which can be purchased, but why to buy something, when you can print it.

I kept the design pretty close to the original tool with part No. 613634.

Print Instruction:

I used PETG, but other materials might work, too.
For stability reasons, I set 3 Perimeters,  and 30% infill
I used supports, but it should work without, too depending on printer and filament.

All these setting are made in the pre-sliced 3mf file.

 

VersionDateChange logSlicer
1.004. Jan. 2024first publishPrusaSlicer
Version 2.5.0

Tagi