Booty Gantry XY Joint Rail Shim - Creality K1, K1 Max, K1C
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shim for removing play in the linear rail slot on the Booty XY joints.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 24
- Makes
- 0
- Views
- 1,224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- GNU General Public License v3.0
Info:
The one STL has 4x of all 3 sizes: 0.1mm, 0.2mm, and 0.3mm, in case there is an inaccuracy while printing or one breaks.
The shim is the same depth as the rail slot, but is not required to go fully in. If there is excess, and the rail seems solid, it can be trimmed off.
I recommend waiting to fully tighten the rail screw until the gantry is at least secured to the top frame, and the tensioner and motor-mount grub screws are secured against the Y rods. This is much easier with a screw that has a 2mm allen wrench socket (I use button head M3s). The 2mm allen will fit in the hole for the rail screw much easier than a 2.5 once the gantry is on the frame.
Print settings:
- 0.1 layer height
- High-temp material
- Single direction infill in the same direction as the long side of the model to help with strength on insertion (see photo of sliced file)
Reason for making:
I reprinted my Booty Gantry parts on the Prusa HT90 (at my work, I cannot afford that lol) and the tolerances were too loose since the HT90 is crazy accurate.
There was excessive play in the slot for the rail on the XY joints and the single screw holding it in wasn't enough to compensate, so I created these small shims to suck up any space.