Standalone base for lamps
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.50 – €4.28 net (excluding VAT)
For file: Lamp base_0.3mm_PLA_MK3S_3h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.89 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 3.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Standalone lamp stand to use with my lamp designs
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is used as standalone base to use with lamps designed for the mechatronics base.
Print settings for woodfill filaments:
- Print settings: 0.30 mm DRAFT
- Filament: PLA woodfill
- 15% Grid infill
- 0.6 mm nozzle to avoid clogs
- NO SUPPORTS CUSTOM MADE
I have put the G code for 0.4 mm nozzle also if you want to print with normal PLA.
Meant to use with LED candles or other LED lamps such as https://www.amazon.de/-/en/Homemory-Electric-Flickering-Battery-Operated-Candles/dp/B01J5EEEQW/ref=zg_bs_g_3884399031_d_sccl_1/262-8577872-6632136
Check models of the lamps here!!