1 / 10
Removable Exhaust Duct for Flashforge Adventurer 5m Pro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose.
- Rating
- 4.5 / 5
- Likes
- 167
- Downloads
- 875
- Makes
- 2
- Views
- 5,453
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose.
Three parts:
- Internal duct to prevent the printer from venting into the motherboard cavity. This has holes for 4 off 6mm diameter, 3 thick magnets, but really only needs one to hold it in place. The holes are deeper than the magnets, so they should be pushed down to the bottom, to allow the fan's screw heads to fit into the holes too. Prints without supports.
- External duct that use two of the existing back panel fasteners and a single M3 screw to fix to the printer. This also requires 6 off 6mm diameter, 3mm thick magnets. This needs supports when printing.
- A removable and magnetic adapter that fits a 100mm / 4" hose or duct. This also requires 6 off 6mm diameter, 3mm thick magnets. Prints without supports.
I recommend attaching this to a bathroom / hydroponic style inline duct fan and then to the outside via a window or similar. To get best air flow, you can remove the internal exhaust filter too.
I hope it helps you avoid some VOCs and smelly filaments!
-------
Now updated with the Fusion files for those who want to modify / remix. Please remember the license and attribute where necessary.