1 / 4
Quansheng UV-K5 Belt Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple belt clip for Quansheng UV-K5 (8) with a magnet and one M3 bolt.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 79
- Makes
- 2
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
My Quansheng UV-K5 (8) didn’t come with a belt clip, so I designed my own! This clip is designed to be easy to print without supports while providing a secure and functional attachment for your radio.
🖨 Printing Instructions
- Printer: Tested on Prusa MINI
- Material: PETG (recommended for durability, but PLA should also work)
- Nozzle: 0.4 mm
- Layer Height: 0.2 mm
- Supports: Not needed
🛠 Assembly Instructions
- Prepare the insert part: The small “pin” on the insert needs to be slightly bent using heat. This pin acts as a wedge and fits into the square recess on the Quansheng body, keeping the insert in place.
- Insert the magnets: Press small neodymium magnets (ø6×2 mm) into the holes in both pieces. Ensure the polarity is correct so the magnets attract each other.
- Secure with a bolt: Use an M3×30 mm DIN912 bolt and nut to connect the two pieces together.
- Attach to the radio: Slide the assembled clip into the recess on the Quansheng UV-K5. It should be a tight fit, so apply slight force if needed.
Let me know if you have any feedback or improvements! 🔧📻