56 models
UPDATE 14.04.2024: Added “Battery pack activator” this little tool now enables you to activate your battery pack after swapping cells on the go. The BMS sadly shuts down every time you disconnect the battery and needs to be activated…
Volume knob protection for Quansheng radio UV-K5 & UV-K6 Print Settings Resolution: 0,1 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer: 4 Infill: 15% - Honeycomb Supports: No Rafts: No Filament: Any
Base for Quansheng radio UV-K5 & UV-K6 Previous version: https://www.printables.com/it/model/685423-stable-base-quansheng-radio-uv-k5-uv-k6-v1 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button…
Its a 2-way Molle mount for a Quansheng UV-K5 radios. Can also be used in other 25mm strapping. The mount uses a small nub against a rivet in the clip, to better secure the radio clip in place. Print settings: Best printed in 0.2mm layers…
If you like this model, please consider a donation: Buy me a coffee link Print Settings: Infill of 0% is just fine Wall Count: 4 Top/Bottom Layers: 5
UV-K5 Radio wall mount. Dual and single.
New knob for Quansheng UV-K5 if you lost it or just don't like the color or shape of it. With a button, you can print from ASA and smooth it nicely with acetone vapors. Print parameters Nozzle: 0,4 - O,2 Supports: NO Material: PLA, PETG,…
Easiest remix I've done using only the text modifier in Prusa Slicer 2.6.1 to make a triangular hole as volume level marker. I've included the .3mf file so you can remix your own.
Stolní stojánek pro radiostanici Quansheng UV-K5, díky velké základně je velmi stabilní i s použitím delších antén. Pokud chcete extra stabilitu, vsypte do infilu písek, sůl nebo jinou zátěž. Realy stable base for Quansheng UV-K5.
Perfect fit with no rattle car mount for your Quansheng UV K5/6/ Plus radio on the passenger side ( in my case a Volvo S60 2006) Locks in nicely with a satisfying click with no shaking or rattle while driving. Use double sided foam sticky…
UPDATE 01.04.2024: Added Antenna dapter for original K5 antenna and ABBREE folding antenna. I play around with my Quansheng way to much, including constantly changing antenna, doing measurements and so on, SMA connector is not meant to be…
Ein Ständer für das Quansheng. Verwendbar mit großem oder kleinem Akku. Mit dabei wieder die Fusion Datei, damit ihr bei Bedarf etwas ändern könnt. Viel Spaß beim Nachbau. 73 de DK4DO
Stable Base for Quansheng radio UV-K5 & UV-K6 - V1 New Version: https://www.printables.com/it/model/695481-stable-base-quansheng-radio-uv-k5-uv-k6-v2 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4…
This is a small skadis mount for the Quansheng UV-K58.
Two files - The ‘extended’ version has a longer stem that seems to get a better grip on the pot. If you like this model, please consider supporting me: Buy me a coffee.
Got myself an “original” Nagoya na 771 but the included spacer wasnt doing his job and the antenna was not straight on the SMA connection, that for I created a perfect fitting spacer in 3 different heights so when the antenna screws in…
This hand held radio, like other isn't quite stabile expecially during operation with external antennas or mike, so i've quickly made this base . Base stands are available for other radio too. It's made in PETG but any rigid material is…
This model was shared with me as a nice way to hang your Baofeng radios, or more specifically for me, your Meshtastic devices that have Baofeng clips (like those from https://www.printables.com/@AlleyCat) from the dash of your vehicle. I…
stand with solid bottom or for balancing weight
This is remix of 18650 holder made from scratch for 21700. Print with supports. You need: Type-C 2S USB BMS 15W 8.4V1.5A -…
If you like me have a battery pack for Quansheng UV-K5(8) radio that is no longer charing or has any capacity, don't toss it or buy new one. Convert it to use 18650 cells instead. Crack open the old battery pack and snip away the nickle…
Uses M4 screw and nut for attaching to the wall.
Case for protection your battery. Use support as you see in the picture.
Kroužek pro vymezení prostoru mezi anténou a vysílačkou při použití mezikusu SMA/SMA
Print at a layer height of 0.05mm for best detail. Your printer needs to be well calibrated.
My Quansheng UV-K5 (8) didn’t come with a belt clip, so I designed my own! This clip is designed to be easy to print without supports while providing a secure and functional attachment for your radio. 🖨 Printing Instructions Printer:…
When I got my UV-K5 I was not aware that there is a protective foil applied to the screen, it was scratched so I got rid of it. I did not want to leave the original screen surface exposed to the open, its plastic and not glass and there…
remix of @CodeFuPanda_807351 design to fit the UV5R properly.
en.qsfj.com Printing without supports, Infill: 15%. Share your printed model.
I wanted to replace the bright orange knob with something more minimalistic on my frequently used UVK5. I like to print this knob in PETG-GF, but pretty much anything will work. It fits on a Baofeng UV5R and probably lots of other HTs.
IMPORTANT: This is draft of the idea that I had, so if you want it refined please comment or just do it yourself via provided step file. This print is replacing bottom cover of the charger and adding power switch which you need to wire…
This is the BKG Knob for Quansheng radios
A "fancy" 2-part knob. A single-part version is also included. Printed with PETG, layer hight 0.2mm.
Hand tool for loosening or tightening the castle nut holding the SMA connector to the case on the Quansheng UV-K5(8). Printed from PETG, I was able to get multiple removals and tightenings before I broke it enough to be useless. When the…
Remix of Jakub's part, just changed it to a hex-fit instead of screw mount.
Optimized for the UV-K1 and UV-K1(8). This knob sits lower and fits the radio case better compared to knobs designed for the UV-K5 or others.
I wanted to mount a tiny straight key on my Quansheng UV-K5 HT for easier portable ops and this is what I came up with.
Printed on an Ender 3 pro with PETG 230 degree nozzle 73 degree plate 20% infill support enabled If you flip the model so it prints with the side that touches the radio down to reduce supports you may end up with a tiny flange that needs…
This is for the metal cased UV-K1(8) that comes with a hard plastic PTT button cover that is blue and black, not the soft rubber PTT button found on other uv-k1 variants. This version is a simple stepped texture that matches the profile…
Mount for using a K6ARK Pico Paddle with a Quansheng 3MM x 6MM Screw used
This is for the metal cased UV-K1(8) that comes with a hard plastic PTT button cover that is blue and black, not the soft rubber PTT button found on other uv-k1 variants. A flat topped PTT button that can be easily customized for call…
Uses the belt clip attachment and screws to attach a carabiner to the radio ONSHAPE direct link to customize dimensions
Printed without supports from PETG.
Gigaset A415 is my first DECT phone that I bought for 36c3 5 years ago, I used it on 36c3, cccamp23, 37c3, EMFCamp 2024 and now 38c3. It's not a great DECT phone, it has no phonebook fetching or belt clip, yet it means a bunch to me.…
To solve the problem of attaching the key to the UV-K1 radio station, I modified the existing bracket, and it turned out
A simple and compact desk stand for the Quansheng TK11-5. Does this fit the other versions of the TK11? I guess it will but to be honest I don't know as I only have the TK11-5 variant. If you find that it fits the TK11 or TK11-8 please…
The Te-Ne-Key is the original ultra portable iambic paddle for sending Morse Code on the go. This adapter allows its use with the Quansheng K1. Simply attach to the belt clip on the K1 and you're ready to send some cool waves on 2 meters.
I printed out this morse code key to see what all the fuss was about with the Quansheng CW craze. This little key seemed like it would work great, but I just needed a way to firmly attach it to the radio. I made this clip that you can…
This mount lets you attach a Quansheng UV-K1 radio to a pole or fishing rod. I use it with a 7m Caperlan Lakeside 100 pole, where it fits perfectly at the base of the first, thinnest section. It should also work with other poles or rods:…
Adapter attaches to the belt clip of the Quansheng UVK1 to allow direct entry straight keying. Use at your own risk. #BKG
Use your Te-Ne-Ke with your quansheng. Printed with PETG or PLA. Use a 3mm x 20mm screw to secure the key. Use supports when printing I have added V2. It is fully extended. This eliminates having sharp edges from the key hitting your…
If you are interested in doing 2m or 70cm CW, you should look into the NR7Y custom firmware for the Quansheng UK-K5/K1 ( CW Firmware Docs - NR7Y CW Firmware Docs ). There are ways to use it with and without opening and modifying the…
I wanted to replace the bright orange knob with something more minimalistic on my frequently used UVK5. I like to print this knob in PETG-GF, but pretty much anything will work. It fits on a Baofeng UV5R and probably lots of other HTs.
