1 / 4
Gigaset A415/A420 belt clip (with baofeng/quansheng belt clip) — image 1
1 / 4

Gigaset A415/A420 belt clip (with baofeng/quansheng belt clip)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Belt clip for Gigaset A415 and A420 DECT phones using a belt clip from Baofeng/Quansheng.

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
206
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Gigaset A415 is my first DECT phone that I bought for 36c3 5 years ago, I used it on 36c3, cccamp23, 37c3, EMFCamp 2024 and now 38c3. It's not a great DECT phone, it has no phonebook fetching or belt clip, yet it means a bunch to me. Earlier this year (January) I designed this belt clip for it, which I only remembered to publish now.

It's not a perfect fit (the phone is full of weird curves), I never fully polished it, but it does the job when you use it with double sided tape.

Do note that two of the pictures (not attached to phone) are of an earlier, slightly thicker variant. I made it 1mm thinner since then, it's sleeker for sure.

Obtaining the Baofeng/Quansheng belt clip:

You can search for “Baofeng Belt Clip” or “Quansheng Belt Clip” on Aliexpress and buy one (or more). You can also use from from your Baofeng/Quansheng handheld radio if you've got one lying around.

I only tested the one from Quansheng, and designed it after the base it has on it.

If you don't have one of those, just use the original model I made which comes with a 3d printed clip: https://www.printables.com/model/1120293-gigaset-a415a420-belt-clip 

Print instructions:

I think it visually comes off better when you print it with the belt clip facing up (not lying on the bed). I've had some bed adherence issues today when printing one for someone else (so consider using an appropriate bed or brim), so I tried it with the belt clip facing the bed and it turned out fine, but it comes off uglier. Included a picture of how both variants come out, and a screenshot from slicer.

PLA, PETG, ABS, use whatever, but my pics are random black PLA. No infill recommendations, I'm happy with my 15% one but you can do 100% if you want it really secure on there.

You will need to enable supports. They're easy enough to clean.

Double sided tape recommendation and installation guideline:

The height (19mm) is same as “tesa Powerbond Ultra Strong Mounting Tape”, and the gap is “designed” for its thickness. Here's one link to it: https://www.amazon.de/-/en/dp/B008JWJYV2 (your local hardware store likely has it for cheaper). Other 19mm high, thick double sided tapes might work, but I only tried this one. I've had it attached in this manner for nearly a year and it's not showing any signs of weakening its grip.

My recommendation is to print the model, apply the double sided tape on it, press it into place, ensure it's a good fit (no gaps on the corners), remove the plastic cover of the double sided tape and then finally stick it on the DECT (right above the speaker, see pictures).

Notes:

I tested the original model with A420 and it worked well enough, but it was a tighter angle on the belt clip (closer to the phone). (Thanks eventphone for lending me one to try.) Unclear if this would work well on it, but it's worth a try!

This model may also work for Gigaset E720 and other models but I haven't tried it with that. Let me know if you do!

There's this other attempt someone made that they sell, https://shop.schulz-stephan.de/3D-printed-belt-clip-for-Gigaset-A415-A420-E720, I haven't tried that one myself. Them also needing double sided tape makes me feel like I didn't do too bad of a job with this. If you don't have a printer but want a belt clip, give them a try :)

Tags