Tiny Paddle Support for Quansheng K1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert your N6ARA Tiny Paddle into this attachment and pop in in to your CW modded Quansheng K1 to add some stability
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 2
- Views
- 325
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
Printed on an Ender 3 pro with
PETG
230 degree nozzle 73 degree plate
20% infill
support enabled
If you flip the model so it prints with the side that touches the radio down to reduce supports you may end up with a tiny flange that needs to be trimmed off depending on your bed temp and initial layer settings. I think it prints better that way and hitting it with an x-acto is no biggie.
The tiny paddle goes in to this print SNUG. It's supposed to. On my paddle, the solder points where the 3.5 plug meets the board were a little long. I trimmed them down to slide into the print easier.
Info on modding your K1 here: https://github.com/briand/uv-k1-k5v3-firmware-custom/releases/tag/beta2