Water Bottle Handle Repair
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.51 – €0.62 net (excluding VAT)
For file: BothShells_0.4n_0.2mm_PETG_MK4ISMMU3_33m_8.56915g.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 33 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A solid repair for a broken Thermos-brand plastic water bottle handle/hanger.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 2
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The “handle” on this Thermos-brand plastic water bottle lid had broken. Constructed this 2-part “shell” that encases the handle and restores full functionality. Actually might be a bit stronger, although it is quite a bit larger.
PETG, 0.4mm nozzle, 0.2mm layer height, no supports.
Use cyanoacrylate or gorilla glue and clamp these together over the handle for a day.
I print even single-color models using my MK4 with MMU3 - if you don't have the MMU then re-slice in PrusaSlicer for your setup.