1 / 2
Fin - Cobra Strike Kayak
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fin/skeg for Cobra Strike Kayak.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 43
- Makes
- 1
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
Tracks a hella straight line (seriously effortless) but way more difficult to maneuver than the original. Designed for surfing easier longboard type waves and distance paddling.
Attaches with the factory hardware & fits flush to the bottom of the Cobra Strike kayak.
Print Settings
- Layer height: 0.2mm
- Material: PLA works great, but PETG/ABS recommended
- Infill: Minimum 40%, but recommended 100% (to prevent water soaking through layer lines)
- Supports: Only under the 90deg overhang
- Speed: Recommended slower towards the top for quality.