302 models
T-Stop insert for bungee cord like the gear rack on my Lifetime-brand kayak. Also works for tarp grommets, etc. An old bungee broke on the kayak gear rack, and I couldn't find replacement metal t-stops to order. Paracord Planet has some…
Hi! This is Sup board drink can holder i created for my friend which you might enjoy as well! Model is inspired by some video i saw online, but i couldn't find one for my requirements so i made one myself. No supports required
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Everybody who owns one of these ITIWIT Inflatable Kayaks knows the Pain: Lugging around the Paddles sucks. So i designed a clip to hold it all together nice and tidy. Print with ABS/PET or PLA, at least 3 Perimeters, 35% gyroid infill. It…
Needed to hang the kayak paddles when not in use. Bracket is made for the handles to snap fit and my be a bit tight for some paddles. Designed in Fusion 360, printed with PETG in Prusa MK3 with .02 nozzle.
I remixed this from a skeg i found on another site, made the skeg taller, and created a bracket that can be glued using rubber cement, so I can remove the skeg for transport and/or storage.
First try at making a fully 3d printed propeller for my kayak with the help of https://www.wageningen-b-series-propeller.com/ No support ofc ;-) Hold together with zip ties The end-goal is a drill powered 3d printed trolling motor for my…
This is a remix of the Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter posted by lieutenantglorp here: https://www.thingiverse.com/thing:2354966 . It was too small for my hose which is why I remixed it. It should fit most…
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the accessory rails. I modified the original to print sections to get the overall lengths I needed. If you make it, post it! :)…
6in from top of flange to inside of spherical end. Mirror for use on both sides. Print only the flange section to serve as a template for cutting. Installed with silicone and 3/16in long grip blind rivets.…
Tiny kayak paddles for Lucky 13 / Mini 13. To print Print vertically (as imported) Print with a brim (to avoid tipping over) Print 0.15mm layer height File Selection Print a “mirrored” blade Print either a feathered or a standard blade…
Hello, I have a Kayak with a paddle 1:10 for Traxxas TRX 4 Defender . A very nice accessory for a 1:10 RC car. The kayak is fully authentic in 1:10 scale. Including oars, it even floats. Good luck with the printing! I used PLA/PETG as the…
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have…
Find 3D-Printed RC cars here.
Made this to rivet on to the side of my sit-on kayak. Used 3/16 x 1" marine pop rivets. Should work find with self-tap screws and screw/nut fastening. The print is in PETG to be UV resistant. The hold is pretty strong but it definitely…
Holder for inReach MINI on the kayak. Attach with one of the cords in front to have it in your reach. Do not forget to secure the inReach MINI to yourself with a cord, the device will come loose if you capsize and end up in the water.…
UPDATE 2 - Feb 15, 2022 Added photos showing how I used custom supports when slicing. YMMV - You know your printer best. UPDATE Feb 15, 2022 I just learned that the originally uploaded file was in inches. I don't know how that happened! I…
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
The two nuts and coupling are used to assemble the paddle/oar of an Intex kayak. Coupling not compatible with original nut. See original parts:…
This is a two part model intended for mounting a Garmin Striker 4 transducer via scupper hole on a kayak. The top and bottom pieces can be attached together using zip ties that go through the provided holes. This makes it a bit more…
I wanted a simple Fish finder mount for my kayak. I have a Perception Outlaw and it as well as other kayaks have the threaded holes for Ram mounts, this uses the holes to mount a Garmin Striker fish finder. I have used this for several…
Extends Aqua Marina paddle (29.2 mm in diameter) with 120 mm. Surprisingly strong and friction fit. Print Settings: Printed in PLA 5 walls, 35% grid infill (I used Cura) Brim is needed, no supports are needed I printed this on SV04…
This is a replacement boat plug that has an opening of about ¾" or about 19mm. It has a groove for grommet ¾" OD and 9/16" ID and 3/32" cross section. Since you print it handle down you will get a nice flat seat and may not need the…
Kayak phone holder mount to go in a Scotty fishing pole holder mount. Settings are set for an iPhone 13. Edit parameters in Fusion 360 file to adjust phone size, mount height, and angle. Print rod standing straight up (without supports is…
Was frustrated for a long time as the mount for our Lifetime Kayak wouldn't hold the seat in place. When at the store yesterday looking at a new Kayak, discovered we were missing a clip. While this clip is not as fancy as the original,…
This is a relatively basic rudder model I created to fit the Haswing Protruar Brushless 12v Trolling Motor. This motor is sold under other names as well, so if you have a chinese 12v brushless trolling motor chances are this will fit. The…
This fits all the lifetime kayaks. print using TPU and 100 % infill along with 2-3 walls
Unlike my recent windsurf mast holder, I just went with a single screw hole. This should be enough for lightweight paddles (as long as the screw hold is solid). With the trim plug and right choice of screw (or paint), you can make very…
I created this bracket for my Lifetime Teton Pro's rod holders after getting the idea from a fellow kayak owner on a FB group. This is meant to reorient your rods so that they are inline with the kayak rather than sticking out…
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear. Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper holes of a Moken 12.5 Kayak. I imagine it could also be easily customized to other kayak makes and models if not used as…
Here's a quick GoPro mount I knocked up for my kayak. Kayak I have is a Current Designs - Pacific - Breeze model. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50%…
This is a remix of https://www.thingiverse.com/thing:4896995 scaled down for a 1.5lb collapsible claw anchor. I printed mine in PETG for longevity. I have it attached with a printed rail found here https://www.thingiverse.com/thing:4822543
This is a Scupper hole plug to keep water from coming into the sit-on-top kayak from the scupper holes. These are printed in flexible filament to allow for a tight flexible fit. to assemble put the ball into the plug and glue on the grill…
The original model has been working great all summer if you want to replace the original clip. I've been frustrated with the 2 part clip on these kayaks so I modeled another clip that ties directly to the strap. The strap needs to start…
I designed these to fit my Perception Outlaw 11.5, I'm sure they fit others as well. I printed these in TPU with 20% infill Diameter of top - 31.75mm Diameter of bottom - 26.8mm Height - 25mm
Two versions of a beer holder for my kayak. I have printed only the simplified version. Attach to the boat with a bolt + spacer, o-ring on the top side and o-ring + spacer + nut on the other side.
This is a clip designed for the seat strap of a Lifetime Kayak. It is the matching part for this half of the clip. Category: Sport & Outdoors
Designed for the Lifetime Tamarack Angler 100. Model: 90818 but will work with many Lifetime kayaks. Many Lifetime kayaks have two swivels to prevent the rear of the fold-up seat from reclining backward too far. This is a terrible, but…
If you do a lot shallow-water kayak (or small boat) fishing you already know what a stake-out-pole is. If you don't, a stake out pole is a replacement for an anchor in water that is more shallow than the pole length. You simply drive the…
This is a Scupper hole plug to keep water from coming into the sit-on-top kayak from the scupper holes. These are printed in flexible filament to allow for a tight flexible fit. to assemble put the ball into the plug and glue on the grill…
Kayak mount for a Garmin Etrex Legend GPS receiver. Mine has a serial port, no USB. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: no Resolution: 0.2mm Infill: 15% Filament: Generic ABS black Notes:…
I have a Lifetime Tamarack 100. I was adjusting my seat on the river and this clip popped off, never to be seen again. I found the model by Hparsonst and gave it a try. It was a little thinner than my original and didn't clip on securely.…
My kayak warranty forbid to screw accessories in so I created this adapter plate to provide a flat surface that can be glued on the kayak shell. 2 models are available, a short and a long one.
Needed a replacement drain plug, this fits the bill. If you want to use the screw which holds in the plug, either drill a small hole or edit the stl to add one. This will need a hammer/mallet to insert, but can be pulled back out by hand
Tackle box prints flat on the bottom but you may need supports for the part that attaches to the kayak and tackle box.
So I needed a storage solution for my kayak pedal drive. It is a knock off chineese hobie mirage flap pedal drive. I have Gladiator geartrack slat wall. I designed a storage rack for it. I still havent found a print orientation I like. I…
Snap on shim for aligning the Old Town seat to keep the seat out of the way of the dry storage lid. There are different sizes in case the tolerances require different. I used the .35" shim for my AP120 seat. Files are saved with thickness…
A fishing rod holder that fits into the "slide-in Aero rac receiver" mountings included with inflatable paddleboards and kayaks sold by BOTE. I printed mine in PETG using a .4mm nozzle using a layer height of .2mm. I used 30% gyroid…
Shoutout to ScootyPuffJR for the base design for their kayak. Our Perception Sound 10.5 Kayak's have slightly larger holes and style so I remixed it to work better for the Sound 10.5's. Printed in TPU @ 20% Infill. Print it top/cap size…
Requires this to be printed - https://www.printables.com/model/252104-garmin-fish-finder-mount-for-perception-kayak-solo - and the two pieces glued together, I used contact cement. I printed both from TPU.
A spare part for badger foot rests for canoe/kayak polo. If this wears down then you need to replace it to stop the footrests slipping down. I have printed these in hard and flexible materials and have been told they both work. Happy to…
Our kiddie-sized Lifetime Wave kayaks have a drain hole drilled in the bow on the upper deck, and we've lost the plugs. The kayak hull filled with water after just a couple hours goofing around on the lake. I'm assuming the open hole on…
a cheap bucket adapter for lifetime kayak with rope dry hull you use a 2.5 q bucket from lowes. i would recommend double sided taeping the adapter to the kayak to make it not fall out. how it works: this is a bucket dear god there is more…
I bought a Big Water 132 and needed to raise my kayak cart to prevent the beach wheels from rubbing the body of the cart. This will lift the frame an additional 2 inches to provide the extra clearance. You will need longer bolts and wing…
For instructions on how to design and print your own, go to: Designing Multiplanar Origami Printing Multiplanar Origami Open the 3mf file as a project in Prusaslicer to see when to add the mesh and where the Kapton (to prevent adhesion)…
Printed bungee mount, works with ¼ max diameter bungee and hardware/similar linked below. ¼ - 20 thread kayak rail/track mounts. https://tinyurl.com/4yf2yab8
Simple mount to hang your ski, bike, kayak or other sport equipment accessories for roof racks on the wall. The mount is designed to be used with the industry standard 20x20mm m6 bolts that are used with Thule, VW and other T-slot roof…
I printed this in PETG with: 0.16mm High Quality 50% Sparse infill 50% Infill/Wall
For assembly you need Metal pipe 12-12.5 mm thick Bolt M5 15 mm (2 pcs.) Bolt M5 35 mm, can be longer (2 pc.) Bolt M4 20mm (4 pc.) Nut M4 (4 pcs.) Nut M5 (3 pcs.)
This model comes in two versions; both share the same core but feature different fin designs for two separate motors. I highly recommend printing with ASA for its strength and UV resistance. For the throttle, a simple servo tester or an…
All-Terrain SUP Cart Using a Skateboard Truck This project converts a standard skateboard truck into a practical transport cart for SUP boards, kayaks and beach equipment. Instead of designing the entire axle and steering mechanism from…
Should probably be printed with PETG or other high temperature material. It doesn't get hot from the engine, but it could get hot from the summer sun. It can be left under the hood year round, since it doesn't interfere with anything down…
Replacement for paddle clip on my kayak that I have broken multiple times. Hoping this is stronger. Printed it on its small side to ensure the layers were not stressed when snapping the shaft in place. Seems strong enough.
petg or better, 55% or denser.
I really didn't like how the 2 small front compartments would hold water in the depressions. To dry these you have to remove the screw and hold the nut internally and reinstall after. I designed and 3d printed a resolution. These are a…
I've designed an action cam support to be fixed to the front fin of the Itiwit kayak (Decathlon). There are two versions of the model. I've printed and tested the first one. The "rounded" version is quite similar..the main difference is…
I needed a way to secure my kayak on my car roof. You only need to put the stopper with the webbing attached into the trunk or in between a door and you have a secure attachment point.
Some older Perception kayaks (WW (e.g. some pirouette super sport) and Canoe Polo boats) came with foam seats that could be swapped out for a different size fit. The seats attached via a lug on each side that locks into a corresponding…
The original really was good and I almost used it as is, but I really wanted to try it in TPU. Printed well enough, but with it being stretchy, I needed to make the clamping arms tighter. So I split the model in half, brought the two…
This is a replacement part for a paddle holder I printed for a friend's kayak/canoo a while ago. I was told it fits and works perfectly, but unfortunately I don't know the brand of the boad, or even how the paddle holder is attached to…
A minimalist kayak model with a sleek symmetrical hull, pointed ends, and recessed cockpit detail. Designed for display, desk decoration, or educational use.
I made this 5/8 inch diameter friction plug for my Lifetime Chute 98 Kayak using PLA+. It requires a rubber O-ring to keep water out and stay in place. It has plenty of room for some twine or some other small string to tie to the top of…
This puts the transducer under the hull without hanging an arm off the side of the kayak. It clamps through a scupper on one long M6 screw, and you tighten the wing nut from inside the boat instead of lying under it. Four printed parts.…
So I needed a storage solution for my kayak pedal drive. It is a knock off chineese hobie mirage flap pedal drive. I have Gladiator geartrack slat wall. I designed a storage rack for it. I still havent found a print orientation I like. I…
I really didn't like how the 2 small front compartments would hold water in the depressions. To dry these you have to remove the screw and hold the nut internally and reinstall after. I designed and 3d printed a resolution. These are a…
Yes, this project is destined to end very badly. I've printed 2 handles to steer a 2 meter training kite that wraps perfectly around a kayak paddle. What could possibly go wrong?!
🛶 Stampato in PETG, resistente e adatto agli ambienti umidi, questo pratico porta attrezzi è progettato su misura per il kayak Triken 330 . 🔧 È suddiviso in due sezioni per offrire maggiore comodità e organizzazione. 💧 Fori di drenaggio…
Find 3D-Printed RC cars here.
Find 3D-Printed RC cars here.
I bought some cheap kayak wheels from aliexpress. They came with one strap that you somehow had to use to secure the wheels under your kayak. I dedicated two 1" straps to the wheels. Now I can just hook the straps to the wheel frame. The…
Some older Perception kayaks (WW (e.g. some pirouette super sport) and Canoe Polo boats) came with foam seats that could be swapped out for a different size fit. The seats attached via a lug on each side that locks into a corresponding…
Battery box snaps on the post in the front hatch. I added loops on the sides to attach a strap if needed but it doesn't need it. My battery size is 5.94" X 2.56" X 3.7". It's a 12V 7Amh battery that powers my fish finder.
A mounting system for the 3D Sets kayak to the Mogster roof and back racks. Made to look like a looped rope, this mounting system is meant to blend in while still holding the kayaks secure. "F" and "R" are for the front and rear of the…
the latch for my kayak broke. Redesigned it and replaced it with this print plus 35mm M6 stainless bolt and a m6 nyloc nut. Dont know all the models this will fit. Mine is similar to a reelyak. Printed mine in asa with support but petg…
Following a user suggestion, here's a simple, fun kayak toy boat for desk display, bath time play, dioramas, etc. This model comes in two variants: A realistic round-bottom version which captures the classic kayak hull shape for a more…
This model is compatible with the lego system.
My Sun Dolphin kayaks had foam rubber drain plugs that were in bad shape, so I created replacements in Tinkercad. The kayak drain hole is 11mm, and this drain plug is 11.5mm in diameter. Printed in TPU and hollow (three outer walls) so…
Slide used to attach wheels to a backpack and self-made - stroller.
I created these accessories to make using my Watersnake ASP 18lb trolling motor a bit easier on the water, and address some issues I found installing on my Pelican kayak. The motor and mount are a great value, and instead of using PVC…
I bought a Big Water 132 and needed to raise my kayak cart to prevent the beach wheels from rubbing the body of the cart. This will lift the frame an additional 2 inches to provide the extra clearance. You will need longer bolts and wing…
This is a remix of the Inflatable SUP/Kayak Halkey-Roberts Valve inflation adapter posted by lieutenantglorp here: https://www.thingiverse.com/thing:2354966 . It was too small for my hose which is why I remixed it. It should fit most…
I designed these to fit my Perception Outlaw 11.5, I'm sure they fit others as well. I printed these in TPU with 20% infill Diameter of top - 31.75mm Diameter of bottom - 26.8mm Height - 25mm
