Kayak Paddle holder TPU - for 3/16" rivets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the 'Kayak Paddle holder - for 3/16" rivets', I loved the design, but wanted it in/for TPU
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
The original really was good and I almost used it as is, but I really wanted to try it in TPU. Printed well enough, but with it being stretchy, I needed to make the clamping arms tighter. So I split the model in half, brought the two sides together and filled in the lower notch for strength.
Print settings:
TPU filament
10 wall loops with .4 nozzle
Grid in fill at 15%
One wall top surface
Avoid crossing walls (tpu stringing)
Clean with rubbing alcohol and used clear silicone to fill hole under and add additional "glue". I attached it with aluminum rivets. That boat is a two seater. On the first one I found popping the rivet was a little too tight and squashed the TPU more than I wanted. On the second I tighten the rivets close to popping but before it squashed the TPU, then cut the rivet with a dremel.
