Crew Kayak YakAttack Geartrac
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the…
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 219
- Makes
- 0
- Views
- 1,214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the accessory rails. I modified the original to print sections to get the overall lengths I needed.
If you make it, post it! :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
80
Filament: Duramic PETG Black
Notes:
First off, PRINT IN PETG or ABS! Make sure you have 6 walls and 80% infill. You want these to be as strong as possible. Print list as follows:
2x - YakAttack GearTrac\_2 18-inch\_Center4x - YakAttack GearTrac_2 18-inch_End
2x - Yakattack_Geartrac_8
2x - YakAttack GearTrack 13-Inch
All but Yakattack_Geartrac_8 have a slot design to connect them together. They do not need to be glued, just held together to help keep them aligned when installing.
Category: Tools