1 / 2
Rear seat riser for Lifetime Yukon / Teton kayak
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
About 1 inch (26mm) of rise for the rear supports of the factory seat on these Lifetime kayak models.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 95
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear.
Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.