1 / 2
Rear seat riser for Lifetime Yukon / Teton kayak
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
About 1 inch (26mm) of rise for the rear supports of the factory seat on these Lifetime kayak models.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear.
Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.