IO HAWK Phoenix (Mukuta 9) Indicator Protection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An indicator protector for the handlebar-end turn signals on the IO HAWK Phoenix. It might also fit the Mukuta 9+
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
eScooter: IO Hawk Phoenix / Mukuta 9+ (if the same indicators are used)
A simple indicator protector. Similar to how phone cases rarely protect a smartphone from damage in a fall, this protector won’t prevent the indicators from breaking in an accident or if the scooter tips over—the scooter's mass is simply too great. Instead, it’s designed as a bump guard when maneuvering the scooter through tight spaces near walls or narrow entrances.
Application:
Carefully align the cutout with the indicator lights before sliding the protector onto the handlebar end (adjusting it afterward is difficult due to the tight fit). Then simply slide it on. Finally, check the visibility of the indicator lights. Voilá.
Print Settings:
- Printer: Creality K1
- Nozzle: 0.4 mm
- Material: Creality CR-TPU (black) with appropriate settings
- Walls: 3 (Infill is irrelevant as no infill is printed with a 2.4 mm wall thickness)
- Orientation: Printed upright with manually placed tree supports across the width of the cutout (TPU struggles with bridging due to its flexibility)
Print Time for 2 Pieces:
Approx. 2 hours 15 minutes.