Entrance card holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Access card holder broke and I still made a similar one from PETG.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
My access card holder broke. It lasted almost 10 years. I still made a similar one. I'm curious about the durability of PETG in such everyday use. It's also good that mine is unique this way. You can put text on the back surface, or whatever you like. I wrote the text in mine with a .2 mm depth. It came out perfect and error-free.
I printed it upright (see 3mf) and left it with a small boat.
You can scale it freely because it was converted from a clean parametric model. The two mounting brackets on the top have 2 support at the bottom, so you don't need any extra support. You have to cut the thin support off after the holder cools down.
2.6 mm thick card fits in the default size.